Blade made from chromium-vanadium steel. Ball in the long end of the wrench. Same dimensions at both ends. Ergonomic two-component handle with suspension hole.

Concrete drill specially equipped for drilling holes in walls and ceiling beams of concrete, through which corrugated electrical pipes are to be passed. After drilling is completed, the corrugated outer pipe hose is applied to the drill so that the hose can easily be passed through the wall. The method also has the advantage of not running the risk of getting any rubbish in the hose at he bushing.

3/8 in. square bracket. With internal hexagon. Chromium vanadium steel. Matte plated. Super Lock function that protects the bolt’s hexagon.

1/2 in. square bracket. With internal hexagon. Chromium vanadium steel. Matte plated. Super Lock function that protects the bolt’s hexagon.

Bent U-shape for stapling low voltage cables. Intended for cable gun Ironside 2810C. For cable diameter 4.5 mm.

With claw and stop nuts at both ends. WLL = workload. Safety factor 5:1

Adapter developed for corrugated electrical pipes, that are to be installed through walls and ceiling beams. Developed to quickly and easily move the corrugated electric pipe through the pre-drilled hole. The method also has the advantage of not running the risk of getting any rubbish in the hose at he bushing.

* Use the adapter with the drill in the drill before drilling starts.
* After drilling through the wall, remove the drill.
* Attach the corrugated outer pipe hose and inner pipe so that the hose can be easily passed through the wall.

Adapter developed for plumbing tap water system with pipe-in-pipe system, to be installed through walls and ceiling beams. Designed to quickly, easily and in a moment be able to bring both the corrugated outer pipe and the inner pipe of Pex/Alupex through the hole. The method also has the advantage of not running the risk of getting any rubbish in the hose at he bushing.

* Use the adapter with the drill in the drill before drilling starts.
* After drilling through the wall, remove the drill.
* Attach the corrugated outer pipe hose and inner pipe so that the hose can easily be passed through the wall/soffit.

M-thread. Wingnut In accordance with DIN 315. Bright-galvanised steel.

Bright and wide-beam work lamp built for tough places.
Well-suited to both large and small job sites.
Strong, moulded aluminium casing.
The luminaire has an adjustable bracket with screw holes for mounting on a stand.
Practical handle that makes the luminaire easy to carry.
Power switch (on/off) and two protected 230V outlets on the back.
Assembly: Stable independently or even better if mounted on a stand.
Connection: Supplied with pre-wired cord and plug 5m (H07RN-3G1.5mm)

High-quality artist’s brush with squirrel brush and birch handle.

All Ironside SDS + and SDS MAX, 2-cut and 4-cut Hammer drills are made with BC20 Luxembourg Ceratizit carbide blades. Hardness HRA90-91 .5 Automat soldered for highest precision.
2-cut SDS + hammer drill are PGM Certified.

Multi-blade for cutting wood. Round.

Plaster screw with drill bit is used indoors to secure plaster boards to steel frames up to 2.0 mm.
Installation instructions: A screwdriver with an RPM of 2,000 - 3,000 is recommended.
Dimensions : approx. 15 pcs/m², screw spacing 20 cm on disc edge and 30 cm on inner part.

Panasonic Drill Driver 1DD1 is compact 18 V machine, only 16 cm long equipped with a brand new brushless motor which is 30% smaller than our previous one, hence we were able to make the machine as compact as it is. With the latest Dual Voltage technology, it can be run with both 14.4 & 18v batteries. Balanced ergonomic machine with incredible power. Electronic torque setting with impressive accuracy. Supplied with 2 x 3.0 Ah batteries and Tanos Systainer T-LOC.

Whitworth pipe thread. Machine tap with spiral flutes for blind holes. Cobalt-alloyed high-speed steel provides extended wear resistance. DIN 5156. For threading structural steel, unalloyed steel, cast iron, aluminium, copper, bronze, and brass.