LAH without collar, acid-resistant. Impact anchor perfect for suspension systems.
Impact anchor for pre-installation with installation tools. Inner thread for metric screws and rods. Suitable screw length is 1-1.5 x anchor diameter + the installation thickness. Small drill depth simplifies drilling and ceiling installation. Suitable for sprinkler systems.
Impact anchors are intended for use in connection with medium and large loads. The impact anchor is suitable for use in hard materials such as concrete, solid tiles (max. M8) and natural stone. It is important to know that the impact anchor cannot expanded with the help of the screw. Using the impact punchdown tool, drive the edge of the anchor’s slotted part, which thereby expands.

Permitted loads in kN in uncracked concrete C20/C25

M-thread. Hexagonal screw in accordance with ISO 4014 (DIN 931), partially threaded.

Shape of shaft.: Ribbed. Head shape: Flat. Area of application: Outdoors to bring together bits of wood, e.g., in building a fence or wood facades.

SPAX TFT - Wood screw with countersunk head. Pozidriv (Z) crosshead. Multi-head for wood and metal fittings. Patent-protected axle profile is quick to pull in/gentle and adapted to the material. 4CUT tip does not shatter, not even at a short distance to the edge/requires no pre-drilling, attaches immediately to the material.

TKT- wooden screw with rounded head. Pozidriv (Z) crosshead. Multi-head for wood and metal fittings. Patent-protected axle profile is quick to pull in/gentle and adapted to the material. 4CUT tip does not shatter, not even at a short distance to the edge/requires no pre-drilling, attaches immediately to the material.

Drilling and thread-pressing screw for internal mounting of building plate on to different types of underlay. SAPHIR drills and forms strong threads at a coherent pace. Every screw and drill tip is adapted to its material and area of us. Version: Hexagonal head with flange. Key width 8 mm for 3/8". Other: Rotation speed about 1600 rpm.

M-thread. Hexagonal screw in accordance with ISO 4017 , (DIN 933) fully threaded.

Decking screw for harder wood, no pre-drilling required. Very good clamping force between the materials. Cylindrical skull for low splitting effect in the wood material.

Phillips cross recess no. 2. Head Ø 7 mm. Mounting usage: A screwdriver with an RPM of 2.000 - 3.000 is recommended. Dimensioning approx. 20 per m2, screw distance 20 cm. Sharp tip with double-lead threads that grip immediately, penetrate very quickly into the steel frame at the same time that the grooves under the head embed the screw. Suitable for the installation of chipboard, plywood and OSB into steel frames with maximum thickness 1.0 mm. Bases and mouldings can also be secured into wooden frames.

Phillips cross recess no. 2. Head Ø 5,5 mm. Drill bit and threads designed for embedding into steel up to 2 mm. The grooves under the head embed the screw. Suitable for fitting mouldings and bases to steel frames.