Order lines: 0

Ahlsell Products MountingVeneer wall mounting

Veneer wall mounting

Veneer wall mounting

Are you working with shell masonry? Ahlsell helps you find the right products for your work. Our range of products within shell masonry and fastening includes bi steel, wall studs, studs, plastic washers, round bars, insulating washers, and accessories for studs such as mandrels and assembly drills. Learn more about our products in our online shop or visit your nearest Ahlsell store.

Masonry reinforcement with distance

Masonry reinforcement with distance

Art. no.: 319679

Bistål type Bi 30 rf Dista is a new, unique masonry reinforcement with built-in spacer that ensures that the masonry completely encloses the reinforcement, giving it the adhesion it needs to work optimally.

Nails ss 2340 (a4)

Nails ss 2340 (a4)

Art. no.: 110200

Used on a wood block and is equipped with a crested thread and flathead. A tie rod.is used for small houses and buildings with maximum two floors. Tie rods should not be used for cavity walls that are.higher than 6m.Dimensioning bearing capacity (safety class 2) for a tie rod in a chunk of wood is as high as 0.58kN (mortar class B).
Mounting: Crested tie rod is nailed directly into the wood stud. A tie rod is pounded perpendicular to.the wall surface so that the gas seepage depth is at least 50mm, i.e., the entire thread enters into the wood stud. 50mm mounting depth + insulation thickness + air gap + at least 40mm anchoring in the cavity wall.
Installation of insulation and cavity wall rods: The outer insulation is installed after the rods are installed in the frame. Insulation is pressed in situ over the tie rods and fastened to the body with one.of the insulation washers no. 9. The washer is installed on the rod and pushed onto the insulation so that it lies against the insulation without squeezing it together. Wall tie into a shell wall. Least anchoring depth in a shell wall should be 40mm.

Plastic tray No. 9

Plastic tray No. 9

Art. no.: 232207

Plastic washers for insulation are used to keep the outermost insulation layer in place so that it does not fall out of the finger gap behind the cavity wall. No. 9 is made with diameter Ø 75 mm and has three holes for attachment over rod Ø 3, 4, and mm.

Masonry reinforcement

Masonry reinforcement

Art. no.: 288051

Step-shaped reinforcement product specially designed for tile, haydite block, concrete stone etc. reinforcement. Galvanised. CE certified.

Plastic tray K

Art. no.: 454973

Showing 5 of 5