Order lines: 0

Ahlsell Products ElectricAutomation 29-45

Automation 29-45

29 Terminals, labelling, ducts

31 Motor, safety switches

32 Contactors, starter devices

33 Motor controls, drive systems

37 Push buttons, signal lamps

38 Sensors, machine safety

Do you work with electrical service and automation in properties or workshops? Ahlsell helps you find the right products for you. Whether you work with commercial properties or private residences, we have the range for your needs. Here you will find contractors, buttons, sensors, safety switches, and accessories for easy installation. Learn more about our products here or visit your nearest Ahlsell store.

Timer relay a-collection

Timer relay a-collection

Art. no.: 4098560

Function Op, operation delayed: Time calculation starts when the contact on the active input is closed. After the set time the relay switches on regardless of whether the contact on the active input is closed or open. If the contact is closed again after the time calculation has been switched off, the relay turns off and the time calculation starts again.
Function in, delayed disconnection: Time calculation starts and the relay opens when the contact on the active input is closed. After the set time the relay switches off regardless of whether the contact on the active input is closed or open. If the contact is closed again after the time calculation has been completed, the relay turns on and the time calculation starts again.
Function Dr, drop out delayed: The relay opens when the contact on the activation input is closed. When the contact is broken the time calculation starts. After the set time, the relay turns off. If the contact on the active input is closed while the time calculation is being made, the time calculation is reset while the relay is still turned on.
Flashing Function - Function R: (ON time first), (Function, Rb, OFF time first). When the control voltage is connected, the time starts to be calculated, when the period has expired the relay disengages. When the time for the disengaged relay has expired, the relay opens. This process continues as long as the control voltage is connected. The time for the rest and running time is equal. All relevant data, as well as the circuit diagram are clearly marked on the side of the relays.
Indication: 2 LEDs. Green lights up when the control voltage is connected. Yellow lights up when the relay is closed and flashes during the time calculation

End support Wieland

End support Wieland

Art. no.: 2922618

For 35 rail. 2923811 also fits 32 rail

End support Wieland

End support Wieland

Soft starter RSB

Soft starter RSB

Art. no.: 3304442

Soft starter RSB

Soft starter RSB

Terminal marking label ZB 8, LGS:

Phoenix Contact

Terminal marking label ZB 8, LGS:

Art. no.: 2942901

General
Mark band for terminals, 10 units,
Material, white polyamide, black text
Continuous numbering, horizontal marking

Cable ducting Segma PVC

Cable ducting Segma PVC

Art. no.: 2995234

For traditional cabling in control and distribution cabinets. Due to the cable duct’s cross-section and with the help of the custom SEGMA pliers, no saw is necessary to cut the cable duct.

Logic module LOGO 8.4

Art. no.: 4505746

Logic module LOGO 8.4

Base system S7-1200

Base system S7-1200

Art. no.: 4503113

Compact and flexible.

Measurement/test terminal blocks Weidmüller

Measurement/test terminal blocks Weidmüller

Art. no.: 4279017

For the connection of measuring equipment with current transformers according to IBL 96 (SS 437 01 40)

Contactor 80-150A LC1D, AC coil

Schneider Electric

Contactor 80-150A LC1D, AC coil

Art. no.: 3233094

AC operated. 1sl + 1br auxiliary contact standard. Uncapsulated. 3-pole.

Contactor 80-150A LC1D, AC coil

Contactor 80-150A LC1D, AC coil

Contactor 80-150A LC1D, AC coil

Contactor 80-150A LC1D, AC coil

Contactor 3-pole with multi-coil AF09Z-AF38Z

Contactor 3-pole with multi-coil AF09Z-AF38Z

Art. no.: 3210005

The advantages of a multi-coil contactor are:
•It can be AC or DC operated.
•Handles weak grids i.e. low supply voltage or voltage drops.
•It is energy effective, i.e. it has low losses.
•Can be inspected directly by a PLC with 24 VDC / 500mA output.

Contactor 3-pole with multi-coil AF09Z-AF38Z

Contactor 3-pole with multi-coil AF09-AF38

Contactor 3-pole with multi-coil AF09-AF38

Art. no.: 3210009

The advantages of a multi-coil contactor are:
•4 coils for all coil voltages from 24V to 500V AC/DC
•It can be AC or DC operated
•Handles weak grids i.e. low supply voltage or voltage drops
•It is energy effective, i.e. it has low losses

Contactor 3-pole with multi-coil AF09-AF38

Contactor 3-pole with multi-coil AF09-AF38

Contactor 3-pole with multi-coil AF09-AF38

Contactor 3-pole with multi-coil AF09-AF38

Contactor 3-pole with multi-coil AF09-AF38

Contactor LC1D, DC operated 9-38 A

Schneider Electric

Contactor LC1D, DC operated 9-38 A

Art. no.: 3233131

Direct current controlled. 1NO+1NC standard auxiliary contact. Open type. 3-pole.
Variant A with Everlink power connection.

Contactor LC1D, DC operated 9-38 A

Contactor LC1D, DC operated 9-38 A

Contactor LC1D, DC operated 9-38 A

Contactor LC1D, DC operated 9-38 A

Contactor LC1D, DC operated 9-38 A

Field bus adaptor ACS

Field bus adaptor ACS

Art. no.: 3323981

A field bus allows for communication between converters, PLC systems, I/O devices, and the process. Field bus communication reduces cable wiring costs compared to traditional fixed I/O connections. Field bus systems also offer the opportunity to collect a large amount of data. ABB’s frequency converters as used for general machine applications are compatible with many different field bus protocols.
Frequency converters are delivered as standard with the Modbus RTU field bus interface. Field bus modules are options that can easily be mounted inside the frequency converter.

Field bus adaptor ACS

Field bus adaptor ACS

Single contact block to supplement ZBE

Schneider Electric

Single contact block to supplement ZBE

Art. no.: 3733195

Contact block separate units. Front-mounted.
Harmony® style 4 and 5
Connectable wire area: Min 1x0.22 mm without end sleeve
Max 2x1.5 mm with end sleeve

Single contact block to supplement ZBE

Single contact block to supplement ZBE

Base system S7-1500 ET200SP

Base system S7-1500 ET200SP

Art. no.: 4500197

ET200SP CPU is S7-1500 CPUs in ET200SP format. CPUs are expanded with ET200SP IO. All CPUs have a corresponding Safety CPU, F-CPU. All CPUs have a built-in PROFINET interface (2-port switch). All ET200SP CPUs do not have a display. One must specially order a SIMATIC memory card to all CPUs.

Base system S7-1500 modular

Base system S7-1500 modular

Art. no.: 4500137

All CPUs have a corresponding Safety CPU, F-CPU. All CPUs have a built-in PROFINET interface (2-port switch). CPU 1516, 1517 and 1518 also have an interface for ethernet (PROFINET basic), e.g. to connect to a parent network, and the PROFIBUS interface (only the master, for the slave and expand your module is necessary). All CPUs are equipped with a display. One must specially order a SIMATIC memory card to all CPUs.

Coupling module Simatic PN / PN

Coupling module Simatic PN / PN

Art. no.: 4503882

Connection module for real-time data exchange between a maximum of 4 Profinet I / O controllers. Connects and is configured as PN I / O-D

Mounting package pliers and label roll

Mounting package pliers and label roll

Art. no.: 2973482

Sign profiles on roll, in sign widths 9.5 and 12 mm, with profile pliers FL52ERA.

Sign profile PTE

Art. no.: 2972177

PTE profiles and CAB plate-holders are, together with DYMO marking tape, a very good option for custom manufacturing of markings and marking at installation.
With profile tools FL52ERA it is easy to customise profile lengths for marking tape holders irrespective of whether marking shall be for cables or components. Assembly is with cable ties or screws.
Internal dimensions are always specified in the tables.

Photo cell typ PC 50 Direct detection

Photo cell typ PC 50 Direct detection

Art. no.: 3834859

Robust photocell in reinforced enclosure of polycarbonate/ABS. Only 17 mm width. LED indication of the sensor's status. Transient, short circuit polarity protection and vice versa. Easy installation thanks to three reinforced holes in the enclosure and the included angle bracket.

Safety sensor Eden Dynamic

Safety sensor Eden Dynamic

Art. no.: 3830222

Adam DYN is a coded non-contact safety sensor for gates, gaps etc. A coded signal is required from the security module Vital or Security PLC Pluto. Adam DYN has M12- connector and has high enclosure class, IP69K. This makes it possible to use in extreme environments. The sensing distance between Adam and Eve is 0-15 mm ± 2 mm. Adam DYN info is a version with information output on pin 5.

Rail holder SH

Art. no.: 2920860

Fits rails 2920853-2920857.

Soft starter ATS01N2 Soft start/stop, 0.75 for 15kW 3-phase 380-415 V

Schneider Electric

Soft starter ATS01N2 Soft start/stop, 0.75 for 15kW 3-phase 380-415 V

Art. no.: 3308924

For single phase or three-phase cage induction motors from 0.37 to 15 kW/3 to 32 A.
Altistart 01 is the best solution for soft start and/or soft stop of most applications, it is both simple to use (connection, commissioning) and safe, thanks to the complete motor starting solutions (custom motor protection circuit breakers and contactors from Schneider). By reducing machine wear and limited maintenance. TeSys® Model U, paired with Altistart 01 provides control functions and communication for a motor startup drive.
Adjustable starting current and voltage ramp 1-10s. Boost function. Mounting on DIN rail. Start/stop via potential free contact (24 V).

Soft starter ATS01N2 Soft start/stop, 0.75 for 15kW 3-phase 380-415 V

Soft starter ATS01N2 Soft start/stop, 0.75 for 15kW 3-phase 380-415 V

Soft starter ATS01N2 Soft start/stop, 0.75 for 15kW 3-phase 380-415 V

Soft starter ATS01N2 Soft start/stop, 0.75 for 15kW 3-phase 380-415 V

Soft starter ATS01N2 Soft start/stop, 0.75 for 15kW 3-phase 380-415 V

Terminal marking label ZB 6, LGS:

Phoenix Contact

Terminal marking label ZB 6, LGS:

Art. no.: 2942700

General
Mark band for terminals, 10 units,
Material, white polyamide, black text
Continuous numbering, horizontal marking

Terminal marking label WAD8

Terminal marking label WAD8

Art. no.: 2960019

Group marking, Connection block marking, MultiCard, 33.3 x 8 mm, Polyamide 66, Colour: white

Terminal marking label ZB 5, LGS:

Phoenix Contact

Terminal marking label ZB 5, LGS:

Art. no.: 2942501

General
Mark band for terminals, 10 units,
Material, white polyamide, black text
Continuous numbering, horizontal marking

Industrial relay 11-pin C3-A30 standard

Industrial relay 11-pin C3-A30 standard

Art. no.: 4017606

New generation C3-A30, 11-pin standard relay with mechanical and LED indication and test button (standard coil values). Temperature range: -20 to +60 °C

Control lever B1

Control lever B1

Art. no.: 3802242

Control lever B1

Screen clamp KLBÜ

Screen clamp KLBÜ

Art. no.: 2919891

For the earthing of shielded wires on busbar 10 x 3 mm

Screen clamp KLBÜ

Screen clamp KLBÜ

Screen clamp KLBÜ

Screen clamp KLBÜ

Time relay DMB/PMB Multifunction

Time relay DMB/PMB Multifunction

Art. no.: 4036450

Feature description
Function Op, switch-on delayed: The timer starts when the contact is active. the entrance is closed. After the set time, the relay switches on regardless of whether the contact is active. the input is closed or broken. If the contact closes again after the timer has finished, the relay switches off and the timer starts again.
Function In, delayed disconnection:The timer starts and the relay switches on when the contact is active. the passage closes. After the set time, the relay switches off regardless of whether the contact is active. the input is closed or broken. If the contact closes again after the timer has finished, the relay switches on and the timer starts again.
Function Dr, switch-off delayed:The relay switches on when the contact on the activation input is closed. When the contact is broken, the timer starts. After the set time, the relay switches off. If the contact on the active input is closed while the time count is in progress, the time count is reset while the relay is still switched on.
Blinking function - Function R:(ON time first), (Function Rb, OFF time first) When the control voltage is connected, the time count starts, when the time has expired the relay closes. When the time for the pulled relay has expired, the relay drops. This process continues as long as the control voltage is connected. The time for break and walking time are equal.
All relevant data and wiring diagrams are clearly marked on the side of the relays.

Time relay DMB/PMB Multifunction

Time relay DMB/PMB Multifunction

Padlock NSX 100-250

Schneider Electric

Padlock NSX 100-250

Art. no.: 3184268

Locking device, 1-3 padlocks, permanently mounted, ComPacT, NSX100-250 with rocker

Pressure switch XMP without venting valve

Pressure switch XMP without venting valve

Art. no.: 3877112

3 pole, 20 A 500 v. Secure execution IP 65.
For pressure regulation between two pressure levels. Copes with hydraulic fluid, air, freshwater and salt water.
* = setting wheel to be ordered separately.

Pressure switch XMP without venting valve

Pressure switch XMP without venting valve

Pressure switch XMP without venting valve

Cable markers PA 1/3 Yellow 200-bag

Cable markers PA 1/3 Yellow 200-bag

Art. no.: 2968407

In bags of 200 units. For cables with an area of 1.5-4 mm² , 2.5-5 mm diam.

Limit switch XCKM with pressure regulator (M20)

Limit switch XCKM with pressure regulator (M20)

Art. no.: 3818249

Protection class IP 66 (per IEC 529) metal design

Holder MDH

Art. no.: 2971917

Including marking 0-9, A-C, T, L1, L2, L3, earth and N

Contactor 3RT10 S6 3-pole AC- or DC-coil

Contactor 3RT10 S6 3-pole AC- or DC-coil

Art. no.: 3268200

AC, or DC controlled, 2 sl+2 wide auxiliary contacts

Marking plate ZBY for plate holder, Black

Schneider Electric

Marking plate ZBY for plate holder, Black

Art. no.: 3733494

Marked sign ZBY for sign holder. Red background.

Marking plate ZBY for plate holder, Black

Marking plate ZBY for plate holder, Black

Marking plate ZBY for plate holder, Black

Marking plate ZBY for plate holder, Black

Sign plate holder ready-to-use incl.cable tie

Sign plate holder ready-to-use incl.cable tie

Art. no.: 2989400

CAB: Pre-cut holders for cable marking, 50 pieces, including 100 cable ties

Sign plate holder ready-to-use not incl. cable tie

Sign plate holder ready-to-use not incl. cable tie

Art. no.: 2972156

PTEF: Pre-cut holders for cable marking, 50 pieces, excluding cable ties

Power switch Plastic encased 16/25A 3-pole

Power switch Plastic encased 16/25A 3-pole

Art. no.: 3145760

The enclosures are made of durable thermoplastic (PBT) that is white in colour.
The insertion openings are M-threaded and designed as knock-outs.
Supplied with sealing nipples (IP54) in every switch.
The bottom of the boxes have a Ø 20 mm knock-out opening for input from the rear.
The switches can be locked with padlocks in the Off and the On position after opening the knob’s knock-out.
Condensation hole can be created in the prepared knock-out opening.
BA 316L has a signal lamp.
Neutral terminal for 5-conductor system included.
Switches are halogen-free.

Power switch Plastic encased 16/25A 3-pole

Limit switch Series E100, Ersce

Limit switch Series E100, Ersce

Art. no.: 3810051

Ersce's limit switch meets the applicable standards for physical as well as a measure of NC contacts. Contact block is detachable which facilitates connection and service. Switches typically have contact function "100" = 1NO+1NC with torque.
Desired contact function, see also:
Type 01 = 1NO+1NC without torque.
Type 02 = 1NO+1NC overlapping without torque.
Type 03 = 2NO without torque.
Type 04 = 2NC without torque.
Type 05 = 2NC with torque.

Limit switch Series E100, Ersce

Limit switch Series E100, Ersce

Limit switch Series E400, Ersce

Limit switch Series E400, Ersce

Art. no.: 3810118

Ersce's limit switch meets the applicable standards for physical as well as a measure of NC contacts. Contact block is detachable which facilitates connection and service. Switches typically have contact function "100" = 1NO+1NC with torque.

Desired contact function, see also:
Type 01 = 1NO+1NC without torque.
Type 02 = 1NO+1NC overlapping without torque.
Type 03 = 2NO without torque.
Type 04 = 2NC without torque.
Type 05 = 2NC with torque.

Component plug for plinths UT...-TG

Phoenix Contact

Component plug for plinths UT...-TG

Art. no.: 2911002

For E2912201-E2912204, E2912320, E2910941, E2910063, E2910064, E2910073, E2910074
Can be fitted with resistor, diode or similar component.
Colour: grey
*) Depending on power dissipation of fitted components. Maximum 1W for simple device!

Voltage measurement relay 3-phase for over and under voltage

Voltage measurement relay 3-phase for over and under voltage

Art. no.: 3864692

3-phase monitoring relays for phase sequence/Phase break and Over-/Under Voltage for mounting on DIN rails or 11-pin base.
Functional description
The relay is pulled when the phases or the phases + 0 are within the set limits, the relay falls if the limit values are passed after the set time delay (0.1-30s). The relay also monitors phase breaks and phase sequence, at the wrong phase sequence or phase break the relay falls without time delay.
All relevant data, as well as the circuit diagram are clearly marked on the side of the relays.3 LEDs. Green lights up when the control voltage is connected. Yellow lights up when the relay is on and Red flashes during the time, and is lit with a steady light in alarm.

Interface relay type 48

Interface relay type 48

Art. no.: 4001611

Interface 10 / 20A 230VAC 35mm, LED and varistor, screw connection and metal bracket

Industrial relay type 60

Industrial relay type 60

Art. no.: 4006033

11-pin plug-in version with 3 switching contacts. The relays have light emitting diode (LED) and/or mechanical indication. They are also equipped with push button for manual operation and can be locked in the on position by means of a clamp. Colour coded operation poles, orange for AC voltage and blue for DC voltage. The bases are mounted on 35 mm symmetrical DIN rail or with two screws (M3) on the mounting plate. The relays are CE approved.

Time relay Syr-line type P

Time relay Syr-line type P

Art. no.: 4030189

• Single function
• 11-pin socket
• 7 time ranges 0.5 s - 240 h
• Multi-voltage 12-240 V AC / DC
• Two 10A relay contacts

Time relay Syr-line type P

Time relay Syr-line type P

Fuse clamp WSI

Art. no.: 2919864

Fine fuse 5x20 mm, see list 20.

DIN rails a-collection

DIN rails a-collection

Art. no.: 2929631

Galvanised and made passive. RoHS-compatible.
In accordance with EN 60715.

DIN rails a-collection

DIN rails a-collection

DIN rails a-collection

DIN rails a-collection

Universal relay type 55

Universal relay type 55

Art. no.: 4006647

8 and 14 pin plug-in relay with 1, 2 or 4 variable contacts and mechanical indication. Relays can be obtained with led indication (LED). They are also equipped with push button that can be locked in the on position by manual operation. Colour coded push buttons and operation poles, orange for AC voltage and blue for DC voltage. The pedestal is mounted on a 35 mm DIN rail or with 2 screws (M3) on the mounting plate. The relays are CE approved.

Miniature relay type RXM 2-pole

Schneider Electric

Miniature relay type RXM 2-pole

Art. no.: 4027768

A series of miniature relays with two, three or four switching contacts. Standard relay with long life. Test option provides easier commissioning - test button with the locking arm.

Miniature relay type RXM 2-pole

Miniature relay type RXM 2-pole

Miniature relay type RXM 2-pole

Miniature relay type RXM 2-pole

Miniature relay C7 and C9 QRCplus

Miniature relay C7 and C9 QRCplus

Art. no.: 4016417

A real compact relay with base, when you are looking for a small relay with the big relay's contact data. With touch-protected test button which is non-locking with pressing and remaining in extracted mode. Accessories include test buttons using only the non-locking function or blind plug (if the test function is not desired). The test button is colour-coded, red for AC and DC blue, as well as the most common voltages 230VAC, 24VAC and 24VDC has its own colour shades. The coil input voltage is clearly marked on the relay front and on the coil. CE certified.
Types C7A ... and C9A.. have mechanical indication of actuated contacts.
Types C7A..X and C9A..X.. have mechanical indication of activated contacts and LED indication of actuated relay coil

Showing 52 of 1110