Order lines: 0

Ahlsell Products Cooling Pipe and duct systems FittingsMaxi Pro - Press couplings

Maxi Pro - Press couplings

Do you work with installation and pipe suspension? Then we have duct systems for you. Ahlsell helps you find the products and suspension details. Complete channel systems for pipe suspension are available here to facilitate your work, as well as a large selection of fitting products. Here you will find fully insulated copper pipes, sealing nuts, and road penetration kits. If you are looking for rubber staples or insulating tape, you will also find this. Delivery throughout Sweden. The majority of major brands are in our assortment. Explore our wide range of pipe suspension and duct systems here in the online store or visit your nearest Ahlsell store.

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Art. no.: 19025173

Battery-powered fully automatic radialpress Li-Ion for pressure connections Ø10-40 mm. Power for REMS press jaws mini. Swivel coupling for press jaws, with automatic locking. Electro-hydraulic drive with a powerful, battery-powered motor 14.4 V, 420 W, robust planetary gear, eccentric reciprocating pump and compact, highly effective hydraulic system, safety switches. Battery Li-Ion 14.4 V 1.3 Ah, quick charger Li-Ion/230 V, 50 – 60 Hz, 65 W.
In a stable metal box.

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Maxi Pro Angle 90 ° Int x Int

Maxi Pro Angle 90 ° Int x Int

Art. no.: 1189606

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved To be able to install B Maxi pro, you must have completed a shorter training. Contact your salesperson for more information or complete the training online by registering at this link: https://bmaxipro.conexbanninger.com/en-gb/

Maxi Pro Splice Pipe Int x Int

Maxi Pro Splice Pipe Int x Int

Art. no.: 18005800

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

Maxi Pro Reduction Int x Int

Maxi Pro Reduction Int x Int

Art. no.: 1182937

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

Maxi Pro Fitting Reduction Ext x Int

Maxi Pro Fitting Reduction Ext x Int

Art. no.: 1752780

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

Maxi Pro Angle 90 ° Fitting Ext x Int

Maxi Pro Angle 90 ° Fitting Ext x Int

Art. no.: 1189597

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

Maxi Pro nAgle 45 ° Int x Int

Maxi Pro nAgle 45 ° Int x Int

Art. no.: 1189615

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

Maxi Pro T-tube

Maxi Pro T-tube

Art. no.: 1185708

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

Press Tool Novopress ACO103 Bluetooth for PB1 Press System

Press Tool Novopress ACO103 Bluetooth for PB1 Press System

Art. no.: 1947135

The ACO103 is small and light and has many valuable features to make working easier, faster and safer. The LED signal located under the transparent start button gives information about the battery or the status of the pressing units or occurred failures.

Maxi Pro End Cap

Maxi Pro End Cap

Art. no.: 1757813

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

Ball Valves for Press with Schrader 48 bar

Ball Valves for Press with Schrader 48 bar

Art. no.: 17011950

Ball valves with shrader and smooth ends for pressure. Can be used with both B Maxi Pro and ZoomLock.

Maxi Pro Flare Coupling

Maxi Pro Flare Coupling

Art. no.: 18005868

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

P-trap for Press

P-trap for Press

Art. no.: 17011972

Oil traps designed to be mounted with press systems, eg Zoomlock couplings or equivalent in heating and cooling installations.

Refrigerant Distributor for Press

Refrigerant Distributor for Press

Art. no.: 17011965

Refrigerant distributor / Y-couplings including insulation bowls designed to be mounted with press systems in heating and cooling installations. Can be used with both B Maxi Pro and Zoomlock press couplings.

Pressback Rems Mini BMP

Pressback Rems Mini BMP

Art. no.: 1947245

REMS Mini pressback BMP special for the press sleeve system Conex Bänninger B MaxiPro for cooling and air conditioning technology. Very durable press jaws Mini of forged, tough and hard especially hardened special steel. The press contours for REMS press rods are system-specific and correspond to the press contours in each press sleeve system. Thus faultless system compliance, safe pressing. Fits all REMS Mini-Press models.

Pressback Rems Mini BMP

Pressback Rems Mini BMP

Pressback Kit Rems Mini BMP

Pressback Kit Rems Mini BMP

Art. no.: 742783

System box L-Boxx incl. REMS Mini press jaws BMP as described, especially for the press sleeve system Conex Bänninger MaxiPro for cooling and air conditioning technology. The press contours for REMS Mini press jaws are system-specific and correspond to the press contours in each press sleeve system. Thus faultless system compliance, safe pressing. Fits all REMS Mini-Press models.

Maxi Pro Long Repair Joint

Maxi Pro Long Repair Joint

Art. no.: 1182945

Press couplings for air conditioning and refrigeration applications. Approved for use with copper pipes complying with EN12735-1 or ASTM-B280. Approved oils: POE, PAO, PVE, AB and mineral oils. Density: Helium max 7.5 × 10-7 Pa, m3 / s at + 20 ° C, 10 bar. Vacuum: 200 microns O-ring: HNBR Maximum burst pressure: 144 bar Standards, tests and approvals: UL 207 file no. SA44668, UL 109 - 7 Pull Test, pass, UL 109 - 8 Vibration Test, pass, UL 1963 - 79 Tests of Gaskets and Seals, Used in Refrigerant Systems, pass, ISO 5149-2, pass, EN 14276-2, pass , EN 378-2, approved, EN 16084, approved, ISO 14903, Tightness Test, approved ASTM G85, approved

Maxi Pro Lubricating Oil

Maxi Pro Lubricating Oil

Art. no.: 1739827

Lubricating oil for o-rings in B Maxi Pro press fittings. Used if the o-rings are dry.

Maxi Pro Depth Gauge and Pencil

Maxi Pro Depth Gauge and Pencil

Art. no.: 18005899

Depth gauge and pen used to measure and mark the depth that the pipe should reach when installing B Maxi Pro couplings.

Pressback Milwaukee M12 typ BMP: Maxipro

Pressback Milwaukee M12 typ BMP: Maxipro

Art. no.: 66864182

Pressback Milwaukee M12 typ BMP: Maxipro

Pressback Milwaukee M12 typ BMP: Maxipro

Pressback Milwaukee M12 typ BMP: Maxipro

Pressback Milwaukee M12 typ BMP: Maxipro

Pressback Milwaukee M12 typ BMP: Maxipro

Showing 20 of 20