Order lines: 0

Ahlsell ProductsCooling

Cooling

Air conditioning

Liquid cooling unit

Control & monitoring systems

Installation accessories

Pipe and duct systems

Refrigerant, oil and refrigerants & heating media

Service equipment

Solar heating & HVAC accessories

Consumer products KCC

Ready To Install package

Are you looking for refrigeration products? Among Ahlsell's cooling products are compressors, cooling units, heat exchangers, air conditioning, heat pumps, liquid cooling units, computer cooling units, control, and monitoring systems, valves, installation accessories, pipe and duct systems, refrigerant, oil, cooling and heating media, service equipment, solar heating, plumbing accessories, and pool heating. We value reliable, long-lasting products. As a result, you can count on us to provide you with only high-quality cooling products. Take a look at the entire range of refrigerators we have in-store or online at in out webshop.

Safety Valves 3060

Safety Valves 3060

Art. no.: 7033461

Exhaust capacity of air is given for an exhaust temperature of 20°C and calculated as per EN 13136 : 2001.

Chiller / Heat Pump Control - Eliwell

Chiller / Heat Pump Control - Eliwell

Art. no.: 7182080

The main elements in the new Energy ST range are easy
installation and use: all of the most important functions in the user interface can
be activated by four buttons
The four-digit screen with 18 icons (of which seven can be configured) offers clear readability.
With the help of just four buttons it is possible to change the screen. select operating mode, activate manual defrosting, turn the regulator on/off and navigate menus in ordered folders.
Access to folders and parameters can be configured using three different levels: end-user, service and manufacturer.

Rivacold Controller

Rivacold Controller

Art. no.: 7434111

Spacer Cups Armafix Ultima UDP, with insulation thickness 13 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 13 mm

Art. no.: 43871312

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Coils 10W

Art. no.: 1816702

IP67 AC voltage. All coils have a connection terminal block

Pressure Transmitter

Pressure Transmitter

Art. no.: 41003366

Pressure Transmitter

Hitachi Styrsystem

Hitachi Styrsystem

Art. no.: 72424320

Hitachi Styrsystem

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Art. no.: 43814018

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >1000.0, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings. Length tolerance ± 1.5%.

WIFI Kit Innova PAC

WIFI Kit Innova PAC

Art. no.: 7125125

WiFi module for controlling Innova´s PAC devices via the EWPE smart app 7125125 fits 4-way cassette IGZCAPxxNI-1 and Channel-connected cassette IGZDUPxxNI-1 7125126 fits Floor / ceiling model IGZFCPxxNI-1

2 way manifold R744

2 way manifold R744

Art. no.: 71186622

Installer thermometer

Installer thermometer

Art. no.: 7065915

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Art. no.: 43871912

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Spacer Cups Armafix Ultima UDP, with insulation thickness 25 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 25 mm

Art. no.: 43872515

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Ball valves K65 with schrader

Ball valves K65 with schrader

Art. no.: 17011945

Ball valves from Refrigera for trans-critical CO2 in fully welded construction with minimal pressure drop and connections of K65 copper pipe.
Temperature range: -40°C till +150°C.
No synthetic O-rings.
Teflon gaskets at valve seat and spindle.

Embraco starting relay

Embraco starting relay

Art. no.: 1253014

Check the model in current spare parts list

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Art. no.: 43802006

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Pipe Insulation Tubolit DG, (thermal insulation) 20mm instruction slotted

Pipe Insulation Tubolit DG, (thermal insulation) 20mm instruction slotted

Art. no.: 45206015

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

HIGHWALL INNOVA PAC

HIGHWALL INNOVA PAC

Art. no.: 7125210

Samsung Utomhusenhet A2W R290

Samsung Utomhusenhet A2W R290

Art. no.: 997083

Expansion Valves TCLE / TJRE / TERE / TIRE / THRE for R134a, R513A and R1234ze

Expansion Valves TCLE / TJRE / TERE / TIRE / THRE for R134a, R513A and R1234ze

Art. no.: 7170254

Max. test pressure 32 bar.
All valves are supplied in a set for assembly.
One turn of the static overheating protector corresponds to approx. 0.2 - 1,0K change of the total overheating protection, depending on the refrigerant and the current working range.
Cooling outputs given in KW with +40°C condensation and -10°C evaporation.

Connecting Flange

Connecting Flange

Art. no.: 7170231

For Alco valves TCLE, TJRE, TERE, TIRE and THRE

Safety Valves 3030

Safety Valves 3030

Art. no.: 7031725

Exhaust capacity of air is given for an exhaust temperature of 20°C and calculated as per EN 13136 : 2001. Measuring unit kg/h.

Pipes shiny 5 m

Pipes shiny 5 m

Art. no.: 7120320

Copper pipes for cooling applications and cooling installations. The pipe’s inner surface is polished, clean and dry. After the cleaning process, the pipe ends are sealed in order to keep the inner surface of the pipe clean during transportation and storage. Condition: Hard. Delivery form: Straight lengths.

Maximum working pressure has been calculated based on a soft-annealed copper pipe with Rm = 200 N/mm2 and a safety factor of 3.5. The calculation only includes the copper pipe not couplings.

Teflon Gasket Rotalock

Teflon Gasket Rotalock

Art. no.: 11004603

For Refrigera rotalock valves

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Art. no.: 19025173

Battery-powered fully automatic radialpress Li-Ion for pressure connections Ø10-40 mm. Power for REMS press jaws mini. Swivel coupling for press jaws, with automatic locking. Electro-hydraulic drive with a powerful, battery-powered motor 14.4 V, 420 W, robust planetary gear, eccentric reciprocating pump and compact, highly effective hydraulic system, safety switches. Battery Li-Ion 14.4 V 1.3 Ah, quick charger Li-Ion/230 V, 50 – 60 Hz, 65 W.
In a stable metal box.

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Embraco Sliding Units - Freezer R404A / R452A

Embraco Sliding Units - Freezer R404A / R452A

Art. no.: 4111925

Outdoor condensing units from Embraco • All machines contain high quality components to ensure trouble-free operation. • Optimized size to be able to be placed on a wall • Stackable construction • Robust sheet metal enclosure that can withstand harsh environments and high temperatures • Pull-out drawer allows you to access the entire machine from above • Starting equipment for thermostat operation or pump-down • As standard, lockable work switch, wiper, sight glass readable from the outside, HP, LP, compressor with crankcase heater and stepless fan control are included. All data are stated for R404A, +32 degrees ambient temperature and a subcooling of 3 K according to EN13215

Loops Shiny

Art. no.: 7120080

Also other lengths for hoses are available upon request

Pressback Kit Rems Mini BMP

Pressback Kit Rems Mini BMP

Art. no.: 742783

System box L-Boxx incl. REMS Mini press jaws BMP as described, especially for the press sleeve system Conex Bänninger MaxiPro for cooling and air conditioning technology. The press contours for REMS Mini press jaws are system-specific and correspond to the press contours in each press sleeve system. Thus faultless system compliance, safe pressing. Fits all REMS Mini-Press models.

3-way Motor Ball Valves DUE

3-way Motor Ball Valves DUE

Art. no.: 5363196

Enclosure class: IP65
Pressure class: PN16
15°C till +95°C Brine temperature
Permitted ambient temperature: -20°C - +70 °C
Max operating pressure: 10 bar
Max differential pressure: 2.4 - 3.5 bar
Actuator torque: 11 Nm
Heat resistance: 5 W
Voltage: 230V/50Hz.
Setting time: 90 seconds

Temperature Sensor Other - Eliwell

Temperature Sensor Other - Eliwell

Art. no.: SN206000

AKS 12

Art. no.: 40009392

Air temperature sensor with average temperature range and average time constant

Spacer Cups Armafix FX-4 (3)-with increasing insulation thickness

Spacer Cups Armafix FX-4 (3)-with increasing insulation thickness

Art. no.: 43706012

Can be used together with AF/Armaflex hose series AF-4 and 3.
To carry and insulate coolant- and refrigerant-bearing at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Consisting of shell in a piece coated with glue-coated closure. With built-in water vapour block, which isas good as that of the insulation. Temperature range -50°C - +110 °C.
Built-in water vapour block, µ>10000
Can be used together with AF/Armaflex hose series AF-4 and 3.
Delivered with suitable pipe holder made of zinc-coated steel. When ordering by Article no., include holder
Please note! Spacer shell and holder are ordered separately

Vertical refrigerant Reservoir ALSRV

Vertical refrigerant Reservoir ALSRV

Art. no.: 6910200

ALSRV is a cooling agent reservoir for vertical installation from OCS, which in addition to the usual cooling agents, can be used in cooling agent systems with R410a since these withstand a max. working pressure of 45 bar and are hydrostatically tested at 67.5 bar. Supplied with exclusive rotary lid valves and safety valve. Note that ALSRV 1.0 to ALSRV 2.5 are equipped with solder connections
From size 12 l to 24 L, there is one 1/2" connection for a level alarm. If no level alarm is installed, a 1" connection must be with Article No. 7060560

Control Valve ALCO EX4 - 8

Control Valve ALCO EX4 - 8

Art. no.: 41003023

Series EX is step-motorised valves for fine control of the mass flow in HFC and HFO system. The valves can be used as high-pressure hexagonal valve, for spraying of liquid or hot gas by-pass.
PS = 45bar
Regulation range 10 - 100%

Nominal cooling effects in kW
R407C 43°C/4°C (dew point), UK 1K
R134a, R404A and R410A 38°C/4°C, UK 1K

Copeland ZX Scroll Unit Fridge

Copeland ZX Scroll Unit Fridge

Art. no.: 7161010

Future-proof your site with the help of the new generation of Copeland EazyCool ™ ZX chillers.
At present the unit is approved for R404A, R134a, R513A, R449A, R448A, R407A & R407F. More refrigerant will come in the future.
The new innovative control system gives you full control on whole process such as floating liquefaction and night securing of the fans.
Go to link up with Modbus RTU for remote control and monitoring.
The new design makes the unit blend well into the environment.
All units are fully equipped from the outset with viewing window, drying filter, tank, variable fan control and crankcase heater.
Built-in protections for overcurrent, phase sequence and unbalance between phases via the electronic control system.
The ability to control a cold room via the inbuilt governance that has outputs for defrosting, fan and a solenoid valve.

All data specified at the following temperatures and R449A as refrigerant

Ambient temperature +32°C
Evaporation -10°C
Suction line temperature 20°C
Audio data according to ISO3744 @10m (Night-Day)

Insulation for Ball Valves CO2

Insulation for Ball Valves CO2

Art. no.: 17017985

Insulation for ball valves

Samsung Utomhusdel PAC Standard

Samsung Utomhusdel PAC Standard

Art. no.: 997022

Pressure Regulator for Nitrogen

Pressure Regulator for Nitrogen

Art. no.: 38022154

Robust regulator for nitrogen from Advanced Test Products. Rubber-coated pressure gauges.

Pressure Regulator for Nitrogen

Rotalock Valves

Rotalock Valves

Art. no.: 17022017

Including Teflon gasket. For HFC and HFO refrigerants.

Refrigerant Distributor for Press

Refrigerant Distributor for Press

Art. no.: 17011965

Refrigerant distributor / Y-couplings including insulation bowls designed to be mounted with press systems in heating and cooling installations. Can be used with both B Maxi Pro and Zoomlock press couplings.

Nozzles

Art. no.: 7170176

For Alco valves TCLE, TJRE, TERE, TIRE and THRE

Wall Model IGZL Innova

Wall Model IGZL Innova

Art. no.: 7124091

Standard wall model for general air conditioning applications.
Compact, flat and quiet.
Four fan speeds and automatic mechanisms.
Special high-efficiency plates.
Horizontal air foil.
IR remote control with real time timer.
Automatic restart after power failure.
Turbo mode for quick cooling-down.
Power cable length 5 m to the indoor part (size 9.12 with plug connection).
Standby power 1W.
ErP approved.
Refrigerant R410A.
220-240V / 1-phase / 50Hz
Energy Class Cold IWMV09-12 A++, IWMV 18-24 A+.

Work area cold -15°C ~ +43°C.
Cooling effect based on indoor temperature +27°C, outdoor temperature +35°C.

Dryer Filter ADK - Flare

Dryer Filter ADK - Flare

Art. no.: 7170805

Max operating pressure 46
Corrosion-resistant epoxy paint
high adsorption capacity for water and acid
High filtering capacity
All ratings are given in kW and as perARI710-86 at a vaourisation temp. o -15°C, cond.temp. +30°C
and Δp=0.07 bar.

Testo 557s Measure Set

Testo 557s Measure Set

Art. no.: 4234675

The digital manometer stand testo 557s with 4-way valve block allows fast measurements on cooling units, air conditioners and heat pumps. The large display also helps you analyze the results in graphic form. Finished program functions guide you through the measurement and enable automatic calculation of many important system parameters such as overheating, pressure drop testing or emptying. Thanks to the Bluetooth vacuum sensor testo 552i included in the measuring set, testo 557 can - as the first manometer stand ever - used for wireless vacuum measurement. Bluetooth sensors for temperature, pressure and humidity can be easily connected directly to the instrument and offer maximum flexibility. In combination with the testo Smart app, you can handle the digital documentation directly at the measurement site. In addition, you always have the current refrigerants available and can set your favorites and transfer them to the instrument. The proven quality and high durability guarantee that your manometer stand always delivers high performance, in all circumstances.

Testo 557s Measure Set

Spare Parts Innova

Spare Parts Innova

Art. no.: 7149180

Spare parts Innova

Expansion Valves TCLE / TJRE / TERE / TIRE / THRE for R448 / R449A and R455A

Expansion Valves TCLE / TJRE / TERE / TIRE / THRE for R448 / R449A and R455A

Art. no.: 7170926

Maximum test pressure 32 bar All valves are delivered in sets for assembly. One lap's adjustment of the static overheating corresponds to 0.2 - 1.0K change of the total overheating depending on the refrigerant and the current working area. Cooling effects indicated at + 40 ° C condensation and -10 ° C evaporation. Without MOP

KP 1 Low Pressure Switch

KP 1 Low Pressure Switch

Art. no.: 6021101

Max. test pressure 20 bar.

Evaporator GACC CX 7 mm - CO2 - EC Fans - Electric defrost

Evaporator GACC CX 7 mm - CO2 - EC Fans - Electric defrost

Art. no.: 7444100

Compact Cubic evaporator from Güntner with a wide capacity range max. operating pressure up to 80 bar EC fans Optimized dimensions for transport and storage Easy to install Side plates and drip tray with hinges Ceiling mounting bracket with slotted hole Schrader valve on the outlet Easy access to all components Nominal effects are given at room temperature -18 ° C, Δt8K and for R744 (CO2)

Evaporator GASC RX 7 mm - HFC - EC Fans

Evaporator GASC RX 7 mm - HFC - EC Fans

Art. no.: 60153400

Compact angled evaporator from Güntner with a wide capacity range Approved for all commonly used HFC refrigerants on the market Optimized dimensions for transport and storage Easy to install 2-speed EC fans as standard Ceiling mounting bracket with slotted hole Schrader valve on the outlet Easy access to all components HACCP Certified by TÜV Nominal effects are given at room temperature + -0 ° C, Δt8K (mean temp) and for R449A

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Art. no.: 43501310

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings

Flare nozzles

Art. no.: 7170126

Cooling output in kW with a condensation temperature of +40°C, 1K in supercooling and 8-10K superheat
Evaporation temperature:
R134a -10°C
R404A -35°C (N)
R407C +5°C

Universal Thermostat UT 72, UT 73

Universal Thermostat UT 72, UT 73

Art. no.: 060H1102

For wall mounting

Showing 52 of 1017