Order lines: 0

Ahlsell Products Cooling Pipe and duct systemsCopper pipes

Copper pipes

Straight copper pipes, hard-annealed

Loops copper pipes, soft-annealed

Fully insulated copper pipes

Do you work with installation and pipe suspension? Then we have duct systems for you. Ahlsell helps you find the products and suspension details. Complete channel systems for pipe suspension are available here to facilitate your work, as well as a large selection of fitting products. Here you will find fully insulated copper pipes, sealing nuts, and road penetration kits. If you are looking for rubber staples or insulating tape, you will also find this. Delivery throughout Sweden. The majority of major brands are in our assortment. Explore our wide range of pipe suspension and duct systems here in the online store or visit your nearest Ahlsell store.

Pipes shiny 5 m

Pipes shiny 5 m

Art. no.: 7120320

Copper pipes for cooling applications and cooling installations. The pipe’s inner surface is polished, clean and dry. After the cleaning process, the pipe ends are sealed in order to keep the inner surface of the pipe clean during transportation and storage. Condition: Hard. Delivery form: Straight lengths.

Maximum working pressure has been calculated based on a soft-annealed copper pipe with Rm = 200 N/mm2 and a safety factor of 3.5. The calculation only includes the copper pipe not couplings.

Loops Shiny

Art. no.: 7120080

Also other lengths for hoses are available upon request

A-Tech Pre-insulated Copper Pipes Pairwise 20 m

A-Tech Pre-insulated Copper Pipes Pairwise 20 m

Art. no.: 7121030

Uv-resistant insulation.
Approved for R410A.
Max media temperature: 120°C.
Thermal conductivity (at 0°C): 0.035 W/mK Diffusion resistance: >10.000 fire class:PIII

A-Tech 10 mm Wall Thickness Pre-insulated Copper Pipes 20 m

A-Tech 10 mm Wall Thickness Pre-insulated Copper Pipes 20 m

Art. no.: 7121004

Uv-resistant insulation.
Approved for R410A.
Max media temperature: 120°C.

Pipes Shiny 5 m, Thick Wall - Cupori 221

Pipes Shiny 5 m, Thick Wall - Cupori 221

Art. no.: 7120586

Cupori 221 Ref Cooling Cup tubes are designed for a working pressure of 80 bar and meet the standard EN 12735-1. The tube is easy to bend and easy to install. Cupori 221 Ref is an installation pipe for store cooling with CO2 as freeze buffer. The pipe ends are sealed after the pipes have been cleaned internally. Fittings of K65 can be used for installation. Condition: Hard. Delivery form: Straight lengths:

The maximum permitted internal working pressure of the pipes is nominal and based on calculations of technical instructions of DKI 1/99. In the calculation, the max. working pressure was calculated from a soft annealed copper tube with Rm = 200 N/mm2 with a safety factor of 3.5 and the working temperature is at + 20° C. The calculation only includes the copper pipe, not couplings.

Technosystemi Pre-insulated Copper Pipes in pairs 20m

Technosystemi Pre-insulated Copper Pipes in pairs 20m

Art. no.: 7121073

UV resistant insulation of Polyethylene 6mm thickness Material thickness pipe 0.8mm Fire rated according to EN 13501 - 1: 2009 Thermal conductivity 0.0040 W (M-K)

Pipor blanka 5 m, CuFe2P 130 bar

Pipor blanka 5 m, CuFe2P 130 bar

Art. no.: 74196202

Showing 7 of 7