Order lines: 0

Ahlsell Products Cooling Control & monitoring systems ElectronicsAKO

AKO

2 and 4-step thermostats

Refrigerator and freezer thermostats

Temperature and data logging

Entrapment and refrigerant alarm

Do you work with real estate or installation? Ahlsell helps you find energy-efficient control and monitoring systems for your work. It doesn't matter if you work with office space or larger commercial buildings, we have a wide range of options. With the right monitoring system, you can ensure operation and function control. This category includes thermostats, flow monitors, pressors, and data loggers. Signal converters can also be found here if you're looking for those. Our range includes the most well-known brands. Take a look at our monitoring system selection in the online store or visit an Ahlsell store near you.

DIN-mounted Thermostats with Clock including 1 NTC Sensor - AKO

DIN-mounted Thermostats with Clock including 1 NTC Sensor - AKO

Art. no.: 7170712

The thermostats are equipped with a diagnosis function for the operational history of the facility. All AKOTIM instruments have a connection for communication via CMOS.

Panel Thermostats including 1 NTC Sensor - Wide model - AKO

Panel Thermostats including 1 NTC Sensor - Wide model - AKO

Art. no.: 7170447

The thermostat controls the compressor, defrosting or illumination and the fan. If sensor 2 is connected, the defrosting can be stopped at a temperature. The digital input can be used as a door contact, external alarm, defrost start, control of the energy saving mode or for the control of continuous operation.

*Panel hole: 136 x 29 mm
**Panel hole: 150 x 31 mm
***1 sensor if 2 digital inputs are used. 1 digital input if 2 sensors are used
****For AKO-D10323 configurable via parameter: defrost, alarm, or lighting.

Panel thermostats including 1 PCs NTC sensor-AKO

Panel thermostats including 1 PCs NTC sensor-AKO

Art. no.: 7170469

*Communication via RS485 Modbus RTU.

Wall Thermostats including 1st NTC Sensor - AKO

Wall Thermostats including 1st NTC Sensor - AKO

Art. no.: 7170534

Wall thermostat for regulation of cold and freezer rooms.
Dimensions: 171 x 94 x 42mm.

2-stage DIN Thermostat including 1 1.5 m Sensor Cable IP65 - AKO

2-stage DIN Thermostat including 1 1.5 m Sensor Cable IP65 - AKO

Art. no.: 7170727

The thermostat is equipped with two relays and two sensors which allows for a number of different individual setting options.

Alarm lamp in the event of a power failure - AKO

Alarm lamp in the event of a power failure - AKO

Art. no.: 7170586

Data Logger - AKO

Data Logger - AKO

Art. no.: 7170525

For logging of cooling and freezer rooms.

AKOCore - Wall-mounted Thermostats

AKOCore - Wall-mounted Thermostats

Art. no.: 7170750

AKO Core is the simple solution for managing the control of refrigerators and freezers in combination with condenser units. It is possible to connect a Bluetooth receiver that makes it easy to connect the control to your mobile phone. This facilitates the work at start-up and troubleshooting. With the BT accessory, temperatures can also be logged and then copied over to your computer. As standard, the controllers are equipped with Modbus RTU for connection to superior control systems Also works as a single room thermostat. Easy to install thanks to the configuration guide, available in several different designs so that it will always fit your unique installation, as well as IP65 protection for installations in humid environments.

AKOCore - Wall-mounted Thermostats

AKO Alarm - Closure Alarm

AKO Alarm - Closure Alarm

Art. no.: 7170754

Optical and acoustic alarm for emergencies. For use in refrigerators and freezers. This group of alarms is designed for rooms with temperatures down to -50 degrees. They give an optical and acoustic alarm if someone has been trapped. All units have a relay output for connection to external alarms, for example a GSM alarm system. The model is developed according to the standard EN 378-1 and has RS485 communication for connection to a monitoring system.

AKO Alarm - Closure Alarm

AKO Alarm - Closure Alarm

Bluetooth Transmitter AKO

Bluetooth Transmitter AKO

Art. no.: 7170762

Plugin module for the AKOCore series. With this module you can connect all controllers in the AKCore series with Bluetooth. This gives a clearer picture of programming and troubleshooting of the control.

Showing 10 of 10