Order lines: 0

Ahlsell Products Tools & Machines Welding and Gas Tillsatsmaterial OlegeratBelagda elektroder

Belagda elektroder

Ahlsell's range of tools and machines includes power tools, hand tools, plumbing tools, hand, torch and flashlights, measuring and marking tools, cutters, grinding and brushes, brushes, rollers, wallpaper, and painting tools, cutting tools, welding and gas, compressed air, hydraulics, pneumatics, rubber cloths and vibration damping, cleaning tools, property and office, tools and garden products. We value reliable products that last a long time. That is why you will find tools and machines of high quality in our range. Explore all our tools and machines online or in one of our stores.

Electrode esab ok 48.05 vac-pack

Electrode esab ok 48.05 vac-pack

Art. no.: 301907

OK 48.05 is a basic, allround electrode for non-alloyed and micro-alloyed carbon-manganese steel with very good welding properties, especially when direct current + pole is used. OK 48.05 provides a tough and crack-proof weld. It has good welding properties even at low weld currents, which is an advantage when welding root strands in pipes, for example. OK 48.05 provides the same, good weld quality as OK 48.00 but it welds with a somewhat softer and wider arc. Current type DC+. Code in accordance with: SFA/AWS A5.1 E7018. EN ISO 2560-A E 42 4 B 42 H5.

Electrode esab ok 46.00

Electrode esab ok 46.00

Art. no.: 119396

OK 46.00 is a rutile, all-current electrode that provides an even strand appearance in all weld positions, including vertically downwards and with an easily removed slag. The electrode ignites and re-ignites very easily, which makes it ideal for short welds and tack welding. It is also suitable for overlaying atop large gap openings. It is recommended for structures made of thin and middle-coarse materials with varying joint types and welding positions. OK 46.00 is among the most suitable for welding in zinc galvanised material, and is relatively insensitive to rusty or otherwise contaminated materials. OK 46.00 is recommended for ordinary carbon steel, and for A quality ship steel in ordinary strength grades. Current type AC, DC+ - OCV 50 V. Code in accordance with: EN ISO 2560-A E 38 0 RC 11. SFA/AWS A5.1 E6013. Approval: DB 10.039.05 - DNV 2 - GL 2 - R 2 - VdTÜV 00623 - CE EN 13479 - Class NK KMW2 - BKI 2.

Electrode esab ok 46.16

Electrode esab ok 46.16

Art. no.: 119398

OK 46.16 is an all-current rutile universal electrode with good weldability. The electrode ignites and re-ignites very easily, and the weldability is good in all positions, even descending vertical. OK 46.16 welds relatively cold and can therefore be used for overlaying relatively large gap openings. OK 46.16 is recommended for welding of bottom strands in facade joints, for tack welding and for assembly welding. OK 46.16 is recommended for steels: S235JR (SS1311), S235JRG2 (SS1312), SS1330, SS1331, SS1411, S275JR (SS1412), S275J2G3 (SS1414), SS1430, P265GH (SS1431), SS1434 as well as ship steel in A, D and E-quality in ordinary strength grades.
Current type AC, DC+ - OCV 50 V.
Code in accordance with: SS standard: SFA/AWS A5.1 E7014. EN ISO 2560-A E 38 0 RC 11.
Approval: DB 80.039.03 - VdTÜV 02528 - CE EN03479.

Electrode esab ok 48.00

Electrode esab ok 48.00

Art. no.: 249763

OK 48.00 is a very safe direct current electrode for non-alloyed and micro-alloyed carbon-manganese steel. It provides a tough and crack-proof weld, is quick-welded in rising vertical position. OK 48.00 is, within wide limits, unsensitive to the base material’s composition. When welding bottom strings where full penetration is needed (for example, PIPE welding), it may be appropriate to connect the electrode to the minus pole. OK 48.00 is suitable for welding of such structures where demanding current states cannot be avoided. Current type DC+(-).
Code in accordance with: SFA/AWS A5.1 E7018. EN ISO 2560-A E 42 4 B 42 H5. Approval in accordance with: ABS 3H5, 3YH5 - DB 10.039.12 - DNV 3 YH5 - GL 3Y H5 - LR 3, 3Y H5 - VdTÜV 00690 - CE EN 13479.

Electrode Elga P48P

Electrode Elga P48P

Art. no.: 509942

P 48P is a basic low-hydrogen and all-round, normal yield electrode with a thin case, specially developed for welding of pipes. It is recommended for welding of non-alloyed, manganese-alloyed and micro-alloyed steel. P 48P has a very stable arc, which gives the electrode a large tolerance box for variations in gap openings and edge displacement. It is very user-friendly and safe to use in difficult situations. The root strings come out even and give a slightly convex string profile. Fill and cover strings lay evenly against the base material. These properties minimize the need forsanding, which reduces environmental problems with grinding dust and noise. It ultimately provides high productivity and reduced costs.

Electrode Elga P48P

Electrode esab ok 48.00

Electrode esab ok 48.00

Art. no.: 119405

OK 48.00 is a very safe direct current electrode for non-alloyed and micro-alloyed carbon-manganese steel. It provides a tough and crack-proof weld, is quick-welded in rising vertical position. OK 48.00 is, within wide limits, unsensitive to the base material’s composition. When welding bottom strings where full penetration is needed (for example, PIPE welding), it may be appropriate to connect the electrode to the minus pole. OK 48.00 is suitable for welding of such structures where demanding current states cannot be avoided. Current type DC+(-).
Code in accordance with: SFA/AWS A5.1 E7018 EN. ISO 2560-A E 42 4 B 42 H5.
Approval: ABS 3H5, 3YH5 - DB 10.039.12 - DNV 3 YH5 - GL 3Y H5 - LR 3, 3Y H5 - VdTÜV 00690 - CE EN 13479.

Electrode esab ok femax 33.80

Electrode esab ok femax 33.80

Art. no.: 119384

OK Femax 33.80 is a quick welding, all-current, high-performance electrode especially suited for standing fillet welds coarser material. The electrode is very easy to ignite and re-ignite, and provides a symmetrical and smooth weld profile with easy slag removal. The applicable steel types are general structural steel, pressure vessel steel and shipbuilding steel in ordinary strength grades. OK Femax 33.80 is also produced in 700 mm lengths, intended for welding in Fematic stands or other mechanical electrode holders. Welding in Fematic stands must be performed using alternating current, as direct current can cause blowing action.
Current type
AC, DC(+ -) OCV 50 V
.
Code in accordance with: SFA/AWS A5.1
E7024. EN ISO 2560-A
E 42 0 RR 73.

Approval: ABS 2 - BV 2 -

DB 10.039.28 - DNV 2

- GL 2Y

- LR 2, 2Y - PRS 2

- RS 2 - Sepros UNA 408919

- VdTÜV 00634 - CE EN 13479.

Electrode esab ok 43.32

Electrode esab ok 43.32

Art. no.: 119390

Rutile. OK 43.32 is a very easily welded, all-current electrode with which even novice welders achieve a good result. It is an excellent thin metal electrode and the good flowability makes even dumbbell and fillet welds have an even and beautiful strand appearance. The electrode ignites easily even with small transformers with 50 V idling voltage (OCV). OK 43.32 is recommended for ordinary carbon steel, and for A quality ship steel in ordinary strength grades. Current type AC, DC(+-) OCV 50 V.
Code in accordance with: SFA/AWS A5.1 E6013. EN ISO 2560-A E 42 0 RR 12.
Approval: ABS 2 - BV 1- DB 80.039.02 - DNV 2 - GL 1- LR 1 - VdTÜV 00621 - CE EN13479 - RS 2 .

Electrode esab ok 55.00

Electrode esab ok 55.00

Art. no.: 490799

OK 55.00 is the strongest non-alloyed, all-current electrode especially suited to high-strength, low-alloyed steel or steel castings. The electrode’s brittle fracture strength at low temperatures is extremely good as is the weld’s hot cracking strength. It provides a weld with very good mechanical properties, especially regarding impact resistance. Current type AC, DC+ OCV 65 V.
Code in accordance with: SS standard: SFA/AWS A5.1 E7018-1H4 R. CSA W48 E4918-1. EN ISO 2560-A E 46 5 B 32 H5.
Approval: ABS 3H5, 3Y H5- BV 3Y H5 - CWB CSA W48 - DB 10.039.03 - DNV 3YH10 - GL 3YH5 - LR 3, 3Y H5 - RS 3YHH - Sepros UNA 409819 - VdTÜV 00632 - CE EN 13479.

Electrode filarc 27p vac-pack

Electrode filarc 27p vac-pack

Art. no.: 258175

FILARC 27P is a basic electrode developed for descending welding of dumbbell joints in pipes. The electrode provides a weld with good mechanical properties and low hydrogen content. It also very good to use for fastening as it provides a thin and fine fastening.
Current type
DC+.
Code in accordance with: SFA/AWS A5.5
E8018-G.
EN ISO 2560-A
E 46 4 B 41 H5.

Electrode filarc 35 2.0x300mm

Electrode filarc 35 2.0x300mm

Art. no.: 74683635

FILARC 35 is a basic, allround electrode with very good welding properties. The electrode welds with a soft and stable arc, and is very suitable for using in pipe welding where it provides an even and fine root strand with good fit to the joint edges. It provides good slag removal, which reduces the risk of slag cavities. Current type DC+(-).
Code in accordance with SFA/AWS A5.1 E7018-1. EN ISO 2560-A E 42 4 B 42.
Approval: ABS 3H5, 3Y - BV 3YHH - DNV 4YH10 - GL 3YH10 - LR 3, 3Y H15 - RS 4Y40HH - VdTÜV 02556 - CE EN 13479.

Electrode filarc 35 2.0x300mm

Electorde Esab Ok 53.16 Spezial

Electorde Esab Ok 53.16 Spezial

Art. no.: 388952

OK 53.16 is recommended for unalloyed and micro-alloyed carbon manganese steel and for ordinary ship steel of A-D- and E-grade. OK 53.16 is specially designed for welding with power sources with low open circuit voltage (OCV).

Electrode Elga P48M

Electrode Elga P48M

Art. no.: 392601

P 48M is a basic low hydrogen content DC+ electrode suitable for welding high strength low alloyed steel. It is especially adapted for welding in difficult environments and for steel with high impurity levels. The electrode operates with a particularly stable arc and shows no tendency to ''freeze'', even on low current. Root passes can be welded with DC-. P 48M has very good fracture toughness at temperatures down to -40 °C.

Approval: CE, DNV 4Y40 H5, LR 4Y40 H5, GL 3Y40 H5, RINA 3Y H5, MRS 4Y40 H5.

Electrode Elga P48M

Electrode Elga P48S

Electrode Elga P48S

Art. no.: 392594

P 48S is a basic normal yield electrode designed for direct current welding, + pole. It is specially developed considering the welding properties and has a very soft and stable arc. These features make the electrode user friendly and provide even transitions to the base material in both rod strings and filler strings in all modes. P 48S is a typical all-round electrode and is ideal for pipe welding as well as general constructions. The electrode has low output humidity and slow moisture absorption and is designed for welding of non-alloyed, manganese alloyed and micro-alloyed steel.

Showing 14 of 14