Order lines: 0

Ahlsell Products Technical insulationCellular rubber

Cellular rubber

Armaflex /Ultima

Armasound RD 120

Pipe suspensions

Accessories cellular rubber insulation

Do you need cellular rubber for insulation? Whether you need cellular rubber for a small job or a large project, Ahlsell has the right product for you. We offer cellular rubber for insulating pipes, ventilating ducts for air conditioning systems, and refrigeration ducts. There are a wide range of products we offer in cellular rubber, such as pipe insulation, plates in rolls, spacer cups, surface-coated boards, hoses and insulation fabric on rolls, insulation boards, and accessories such as insulation tape, joint compound, and sealing compound. Find out more about our cellular rubber collection online or at your nearest Ahlsell store.

Spacer Cups Armafix Ultima UDP, with insulation thickness 13 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 13 mm

Art. no.: 43871312

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Art. no.: 43814018

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >1000.0, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings. Length tolerance ± 1.5%.

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Art. no.: 43871912

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Spacer Cups Armafix Ultima UDP, with insulation thickness 25 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 25 mm

Art. no.: 43872515

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Art. no.: 43802006

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Pipe Insulation Tubolit DG, (thermal insulation) 20mm instruction slotted

Pipe Insulation Tubolit DG, (thermal insulation) 20mm instruction slotted

Art. no.: 45206015

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Spacer Cups Armafix FX-4 (3)-with increasing insulation thickness

Spacer Cups Armafix FX-4 (3)-with increasing insulation thickness

Art. no.: 43706012

Can be used together with AF/Armaflex hose series AF-4 and 3.
To carry and insulate coolant- and refrigerant-bearing at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Consisting of shell in a piece coated with glue-coated closure. With built-in water vapour block, which isas good as that of the insulation. Temperature range -50°C - +110 °C.
Built-in water vapour block, µ>10000
Can be used together with AF/Armaflex hose series AF-4 and 3.
Delivered with suitable pipe holder made of zinc-coated steel. When ordering by Article no., include holder
Please note! Spacer shell and holder are ordered separately

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Art. no.: 43501310

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings

Adhesive 520 for Armaflex

Adhesive 520 for Armaflex

Art. no.: 43600004

Special adhesives for the installation of all Armaflex insulation products (except UL/Armaflex & HT/Armaflex. Art no. 43600004 has a brush in the lid.
Colour: Beige
Operating temperature: -50 °C to +105 °C
Application temperature: ideally +15°C to +20°C, not below 0° C.

Insulation Tape AF/Armaflex

Insulation Tape AF/Armaflex

Art. no.: 43600140

Self adhesive insulation tape made of AF rubber cell specially intended for rubber cell insulation AF type, such as thermic insulation.

Spacer Cups Armafix FX-2-with increasing insulation thickness

Spacer Cups Armafix FX-2-with increasing insulation thickness

Art. no.: 43704012

To carry and insulate coolant- and refrigerant-bearing at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Consisting of shell in a piece coated with glue-coated closure. With built-in water vapour block, which isas good as that of the insulation. Temperature range -50°C - +110 °C.
Built-in water vapour block, µ>10000
Can be used together with AF/Armaflex hose series AF 2 and 1.
Delivered with suitable pipe holder made of zinc-coated steel. When ordering by Article no., include holder
Please note! Spacer shell and holder are ordered separately

Spacer Cups Armafix FX-6-with increasing insulation thickness

Spacer Cups Armafix FX-6-with increasing insulation thickness

Art. no.: 43708018

Can be used together with AF/Armaflex hose series AF-6 and 5.
To carry and insulate coolant- and refrigerant-bearing at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Consisting of shell in a piece coated with glue-coated closure. With built-in water vapour block, which isas good as that of the insulation. Temperature range -50°C - +110 °C.
Built-in water vapour block, µ>10000
Can be used together with AF/Armaflex hose series AF-6.
Delivered with suitable pipe holder made of zinc-coated steel. When ordering by Article no., include holder
Please note! Spacer shell and holder are ordered separately

Cooling EF Polar Plus Clip, MEFA

Cooling EF Polar Plus Clip, MEFA

Art. no.: 3878644

Cooling EF Polar Plus Clip, MEFA

Cooling EF Polar Plus Clip, MEFA

Insulation Tape NH/Armaflex

Insulation Tape NH/Armaflex

Art. no.: 19058344

Self-adhesive insulating tape for cellular rubber insulation.

Cellular rubber insulation in plates AF/Armaflex, un glued

Cellular rubber insulation in plates AF/Armaflex, un glued

Art. no.: 43506000

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Type approval 03391/82: Outer layer class II (Fire class B-S3-D0). Tg 3176/83: Pipe bushings
Delivered with the measurements 2000x500mm

Armaflex /Ultima Hose 13mm (tolerance ± 1.5 mm)

Armaflex /Ultima Hose 13mm (tolerance ± 1.5 mm)

Art. no.: 43841310

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Cell Rubber Insulation AF/Armaflex AF-2, only full roll, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-2, only full roll, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43822022

Insulation for pipes in cooling and climate control systems, as well as for installations where saving energy and preventing condensation is required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43812015

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Pipe Insulation Tubolit DG, (thermal insulation) 13mm instruction slotted

Pipe Insulation Tubolit DG, (thermal insulation) 13mm instruction slotted

Art. no.: 45204114

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Cell Rubber Insulation AF/Armaflex AF-1, Hose 9mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-1, Hose 9mm (tolerance ± 1.0mm)

Art. no.: 43801028

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_LS3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-4, with increasing insulation thickness (tolerance ± 1.5 mm)

Cell Rubber Insulation AF/Armaflex AF-4, with increasing insulation thickness (tolerance ± 1.5 mm)

Art. no.: 43804076

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell rubber Insulation Cuffs for 90° Ventilation Duct Bends

Cell rubber Insulation Cuffs for 90° Ventilation Duct Bends

Art. no.: 6540910

Prefabricated insulation sleeves (Napoleon caps) for 90° bends. Of cellular rubber insulation of Armacell XG type.

Pipe Insulation Tubolit DG, (thermal insulation) 9mm instruction slotted

Pipe Insulation Tubolit DG, (thermal insulation) 9mm instruction slotted

Art. no.: 45203018

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Pipe Insulation Tubolit DG-A, (thermal insulation) 9mm Pre-glued

Pipe Insulation Tubolit DG-A, (thermal insulation) 9mm Pre-glued

Art. no.: 45213015

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Pipe Insulation Tubolit DG-A, (thermal insulation) 13mm Pre-glued

Pipe Insulation Tubolit DG-A, (thermal insulation) 13mm Pre-glued

Art. no.: 45214018

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Pipe Insulation Tubolit DG-A, (thermal insulation) 20mm Pre-glued

Pipe Insulation Tubolit DG-A, (thermal insulation) 20mm Pre-glued

Art. no.: 45216035

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Insulation Tape SH/Armaflex

Insulation Tape SH/Armaflex

Art. no.: 45100000

Self-adhesive insulating tape for SH/Armaflex.

Discs, Pre-Glued, Armasound RD 122

Discs, Pre-Glued, Armasound RD 122

Art. no.: 49920019

Open cell plates of elastomeric foam with excellent sound absorption. Effective sound absorption even in thin layers. Self-adhesive

Insulation Tape HT/Armaflex

Insulation Tape HT/Armaflex

Art. no.: 43600147

Self-adhesive insulating tape for cellular rubber insulation.

Insulation Tape AF Tensiontape

Insulation Tape AF Tensiontape

Art. no.: 19055560

PVC tape with protective film, specially intended for pre-glued versions of cellular rubber of type AF for sizes over 54mm.

Armaflex /Ultima Hose 9mm (tolerance ± 1.5 mm)

Armaflex /Ultima Hose 9mm (tolerance ± 1.5 mm)

Art. no.: 43840912

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Armaflex /Ultima Hose 19mm (tolerance ± 2.5 mm)

Armaflex /Ultima Hose 19mm (tolerance ± 2.5 mm)

Art. no.: 43841910

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Armaflex /Ultima Hose 19mm (tolerance ± 2.5 mm)

Armaflex /Ultima Hose 19mm (tolerance ± 2.5 mm)

Art. no.: 43842512

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Armaflex/Ultima cell rubber insulation, plates in rollers, unglued

Armaflex/Ultima cell rubber insulation, plates in rollers, unglued

Art. no.: 19059845

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration.
Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ >7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1, d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Armaflex/Ultima cell rubber insulation, plates in rollers, pre-glued

Armaflex/Ultima cell rubber insulation, plates in rollers, pre-glued

Art. no.: 19059844

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration.
Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ >7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1, d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Adhesive 700 för UL/Armaflex

Adhesive 700 för UL/Armaflex

Art. no.: 43840001

Single-component special adhesive for UL/Armaflex
Colour: Blue
Operating temperature: -50 °C to +110 °C
Application temperature: ideally +15°C to +20°C, not below 0° C.

Detergent for Adhesive

Detergent for Adhesive

Art. no.: 43600005

leaning agent for glue.

Paint Armafinish 99

Paint Armafinish 99

Art. no.: 43600150

Paint for cell rubber insulation.

Adhesive Jug for Cell Rubber Insulation

Adhesive Jug for Cell Rubber Insulation

Art. no.: 43600100

Glue pot for glue for cell rubber insulation.

Cell Rubber Insulation AF/Armaflex AF-5, with increasing insulation thickness (tolerance ± 2.5 mm)

Cell Rubber Insulation AF/Armaflex AF-5, with increasing insulation thickness (tolerance ± 2.5 mm)

Art. no.: 43805028

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1.5%.

Cell Rubber Insulation AF/Armaflex AF-6, with increasing insulation thickness (tolerance ± 3.0 mm)

Cell Rubber Insulation AF/Armaflex AF-6, with increasing insulation thickness (tolerance ± 3.0 mm)

Art. no.: 43806015

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-1, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-1, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43811015

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-1, only full roll, with increasing insulation thickness

Cell Rubber Insulation AF/Armaflex AF-1, only full roll, with increasing insulation thickness

Art. no.: 43821028

Insulation for pipes in cooling and climate control systems, as well as for installations where saving energy and preventing condensation is required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >1000.0, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings

Cell rubber insulation AF/Armaflex, plates in rollers, pre-glued

Cell rubber insulation AF/Armaflex, plates in rollers, pre-glued

Art. no.: 43511310

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings
This typeis coated with glue and is applied directly to the surface without any extra glue. The surface should be cleaned with a cleaning agent meant especially for glue to achieve the best installation results.

Cellular rubber insulation in plates AF/Armaflex, pre-glued

Cellular rubber insulation in plates AF/Armaflex, pre-glued

Art. no.: 43513000

This typeis coated with glue and is applied directly to the surface without any extra glue. But the duct and/or surface should be cleaned with a cleaning agent for glue to achieve the best installation results. Delivered with measurements 2000x500mm.

AF/ Armaflex 99/E Cellular Rubber Insulation, Stripes

AF/ Armaflex 99/E Cellular Rubber Insulation, Stripes

Art. no.: 43523050

Pre-cut insulation band coated with glue and made of AF Armaflex material For insulation at crossovers and joints on ventilation ducts and similar things

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 13mm (tolerance ± 1.5 mm)

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 13mm (tolerance ± 1.5 mm)

Art. no.: 43204012

Insulation for pipes and tanks with high temperatures as well as with variable temperatures. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer), uv-resistant, oil-resistant Temperature range -50°C - +150 °C. Fire class DL-s3,d0.

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 19mm (tolerance ± 2.5 mm)

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 19mm (tolerance ± 2.5 mm)

Art. no.: 43206022

Insulation for pipes and tanks with high temperatures as well as with variable temperatures. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer), uv-resistant, oil-resistant Temperature range -50°C - +150 °C. Fire class DL-s3,d0.

Insulation Tape Tubolit

Insulation Tape Tubolit

Art. no.: 45200000

Tape for Tubolit.

Clips for pipe insulation Tubolit

Clips for pipe insulation Tubolit

Art. no.: 45200005

Clips for Tubolit.

Pipe Insulation SH-A, glued, (thermal insulation), Insulation thickness 11mm (tolerance±1,5 mm)

Pipe Insulation SH-A, glued, (thermal insulation), Insulation thickness 11mm (tolerance±1,5 mm)

Art. no.: 45111115

with glued slits. Made from flexible grey rubber material with closed cells. For insulation of hot and cold tap water in plumbing installations. The SH material's excellent flexibility makes installation extremely quick and easy. Designed specifically to meet the requirements for pipe insulation in sanitary and heating contexts. Not suitable for insulating pipes in cooling or air conditioning systems. Minimum temperature for use: +5°C. Maximum temperature for use: +110°C. (For plate insulation +85^oC.) Fire class: BL-s3, d0 up to 45mm pipe diameter, above this CL-s3, d0. Soundproofing: approved in accordance with DIN 4109. Chemical resistance: against all building materials.

Adhesive for HT/Armaflex

Adhesive for HT/Armaflex

Art. no.: 43600010

1-component glue for HT/Armaflex installation.
Colour: Beige
Operating temperature: -50 °C to +150 °C
Application temperature: ideally +15°C to +20°C, not below 0° C.

Showing 52 of 70