Steel pipes and parts

Ahlsell offers a various range of steel pipes and fittings for any type of project. In our range, you will find everything needed for your next installation. Apart from pipes, we also offer fittings, flanges, sheet metals, and rod couplings in various materials such as stainless steel, carbon steel, and many others. Customers can also request a material certificate in line with EN10204-3.1. This can be requested when placing your order. Explore our wide range of steel pipes and fittings here in Ahlsell's online store or visit your nearest Ahlsell shop.

Acid-resistant pipes EN 1.4432 longitudinally welded, metric EN 10217-7
Acid-resistant pipes EN 1.4432 longitudinally welded, metric EN 10217-7
Art. no.: 1225011
In 6-meter lengths. Standard EN 10217-7 TC1. Annealed, pickled.
ATTENTION! Std EN 10296-2 for DN 700 and larger.
Tolerances YD ≤156 mm according to D3 / T3. YD>203 mm according to D2/T3.

ISO standard Pipe, EN ISO 1127.

Tolerance on outer diameter D:

Outer diameter D≤156, Tolerance class D3, Allowed deviation +/-0.75% or +/-0.3mm. Whichever is bigger.
Outer diameter D≤156, Tolerance class D4*, Allowed deviation +/-0.5% or +/-0.1mm. Whichever is bigger.
Outer diameter D>203, Tolerance class D2**, Permissible deviation +/-1.0%.

*Tolerance class D4 if necessary against special manufacturing only and at extra cost.
**Tolerance class D2 on all pipes with a D to T ratio below 10:1 and press-formed pipes Stos tolerances are guaranteed only on pipe ends.

Wall thickness tolerance T:

Tolerance class T3, Permissible deviation +/-10% or +/-0.2mm. whichever is greater.

Certificate EN10204-3.1 If a certificate is desired, this must be requested at the time of ordering.
Acid-resistant pipes EN 1.4404 longitudinally welded, ISO EN 10217-7
Acid-resistant pipes EN 1.4404 longitudinally welded, ISO EN 10217-7
Art. no.: 1227158
In 6-meter lengths. Standard EN 10217-7 TC1. Annealed, pickled.
ATTENTION! Std EN 10296-2 for DN 700 and larger.
Tolerances YD ≤168.3 mm according to D3 / T3. YD>168.3 mm according to D2/T3.

ISO standard Pipe, EN ISO 1127.

Tolerance on outer diameter D:

Outer diameter D≤168.3, Tolerance class D3, Allowed deviation +/-0.75% or +/-0.3mm. Whichever is bigger.
Outer diameter D≤168.3, Tolerance class D4*, Allowed deviation +/-0.5% or +/-0.1mm. Whichever is bigger.
Outer diameter D>168.3, Tolerance class D2**, Permissible deviation +/-1.0%.

*Tolerance class D4 if necessary against special manufacturing only and at extra cost.
**Tolerance class D2 on all pipes with a D to T ratio below 10:1 and press-formed pipes Stos tolerances are guaranteed only on pipe ends.

Wall thickness tolerance T:

Tolerance class T3, Permissible deviation +/-10% or +/-0.2mm. whichever is greater.

Certificate EN10204-3.1 If a certificate is desired, this must be requested at the time of ordering.
Showing 52 of 337