Ahlsell Products Heating and SanitationGrooved pipe systems VS & industry

Grooved pipe systems VS & industry

Ahlsell has a wide range of products within HVAC of high quality. Here you will find installation pipes, various parts, indoor drains, valves and measuring instruments, baths, showers, toilets and furniture, heating, pumps, assembly, steel pipes, and parts and steel. We have all the products you need to do an outstanding job. Ahlsell has a range for those who work with both installation and assembly. Learn more about our complete range of products online or visit your nearest Ahlsell store and get help from our experts.

Steel tube, EN 10217-1, P235-TR1

Art. no.: 1341288

Length 6 metres.

Center Punch with Magnet

Art. no.: 19045546

Stainless steel pipes EN 1.4307 longitudinally welded, ISO EN 10217-7

Art. no.: 1227124

In 6 metre lengths.
Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Unipak

Unipak Super Glidex Lubricant with silicone, for grooved systems

Art. no.: 3115125

SUPERGLIDEX is a lubricant with silicone and is used when installing plastic sleeve pipes. SUPERGLIDEX is snow-white and has a pleasant creamy consistency. Neutral pH value (approx. 7). Frost-proof. Also available in extra low -30°C special version. Provides easy and problem-free assembly of plastic sleeve pipes, rubber strips and gaskets. The content of silicone means that the pipe parts can be easily dismantled even after a long time, in addition to protecting the rubber gasket from drying out/darkening. Good adhesion in wet/moist environments. Frostproof to -30.

Acid-resistant pipes EN 1.4432 longitudinally welded, metric EN 10217-7

Art. no.: 1225011

In 6-meter lengths. Standard EN 10217-7 TC1. Annealed, pickled.
ATTENTION! Std EN 10296-2 for DN 700 and larger.
Tolerances YD ≤156 mm according to D3 / T3. YD>203 mm according to D2/T3.

ISO standard Pipe, EN ISO 1127.

Tolerance on outer diameter D:

Outer diameter D≤156, Tolerance class D3, Allowed deviation +/-0.75% or +/-0.3mm. Whichever is bigger.
Outer diameter D≤156, Tolerance class D4*, Allowed deviation +/-0.5% or +/-0.1mm. Whichever is bigger.
Outer diameter D>203, Tolerance class D2**, Permissible deviation +/-1.0%.

*Tolerance class D4 if necessary against special manufacturing only and at extra cost.
**Tolerance class D2 on all pipes with a D to T ratio below 10:1 and press-formed pipes Stos tolerances are guaranteed only on pipe ends.

Wall thickness tolerance T:

Tolerance class T3, Permissible deviation +/-10% or +/-0.2mm. whichever is greater.

Certificate EN10204-3.1 If a certificate is desired, this must be requested at the time of ordering.

Profit

Grooved split flange, Red

Art. no.: 1356143

Split flange (GSF)
To create a transition from flanged pipe systems/components to worn -out systems.
PN 16 (EN 1092-2).
The split flange can handle up to 20.7 bar maximum working pressure.

Pressure vessel pipes, longitudinally welded, P235GH-TC1, EN 10217-2 Cert

Art. no.: 34713544

Acid-resistant pipes EN 1.4404 longitudinally welded, ISO EN 10217-7

Art. no.: 1227158

In 6-meter lengths. Standard EN 10217-7 TC1. Annealed, pickled.
ATTENTION! Std EN 10296-2 for DN 700 and larger.
Tolerances YD ≤168.3 mm according to D3 / T3. YD>168.3 mm according to D2/T3.

ISO standard Pipe, EN ISO 1127.

Tolerance on outer diameter D:

Outer diameter D≤168.3, Tolerance class D3, Allowed deviation +/-0.75% or +/-0.3mm. Whichever is bigger.
Outer diameter D≤168.3, Tolerance class D4*, Allowed deviation +/-0.5% or +/-0.1mm. Whichever is bigger.
Outer diameter D>168.3, Tolerance class D2**, Permissible deviation +/-1.0%.

*Tolerance class D4 if necessary against special manufacturing only and at extra cost.
**Tolerance class D2 on all pipes with a D to T ratio below 10:1 and press-formed pipes Stos tolerances are guaranteed only on pipe ends.

Wall thickness tolerance T:

Tolerance class T3, Permissible deviation +/-10% or +/-0.2mm. whichever is greater.

Certificate EN10204-3.1 If a certificate is desired, this must be requested at the time of ordering.

Hydraulic conduit tube, E235, EN 10305-4

Art. no.: 19010011

Hydraulic supply pipe in material E235+N hydraulic supply pipe manufactured in accordance with EN 10305-4, FZ,Niro-look, Cr6-free.

Profit

Lubricant for gaskets 1 kg, Profit

Art. no.: 3901063

Lubricant used in grooved system installation.
3901063 is silicone-free.

See respective product data sheets for physical properties.

Seamless pressure vessel tubes according to EN 10216-2, Sold in descending lengths of 5-7 meters

Art. no.: 1357060

Material P235GH-TC-1 Certificate EN10204-3.1.
In lengths of 5–7 m. If a certificate is required, it must be requested whilst ordering. From TÜV approved production.

Profit

Grooved cap with internal thread, Red

Art. no.: 1356096

Cap with internal thread. Pipe fittings (GB, GT, GRC, GE, GRTR)
Used to make direction changes in grooved pipe systems.
The pipe parts can handle up to 20.7 bar maximum working pressure.

Driver Mini for tube magnet

Art. no.: 91003392

Mini driver for pipes, with magnet. Spirit level drill indicator.

Acid-resistant pipes EN 1.4432 longitudinally welded, ISO EN 10217-7

Art. no.: 1225019

Stainless steel pipes EN 1.4307 longitudinally welded, metric EN 10217-7 TC1

Art. no.: 1227045

In 6 metre lengths.
Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.
PLEASE NOTE! Std EN 10296-2 for Dim 600 and upwards.

Acid-resistant pipes EN 1.4404 longitudinally welded, metric EN 10217-7

Art. no.: 1227135

Profit

Grooved coupling Flexible, Red

Art. no.: 1356132

a-collection

Pressure gauge 2750 stainless steel 63 mm, a-collection

Art. no.: 5113300

Liquid-filled case, stainless steel housing. Media contact parts of copper alloy. Measuring accuracy 1.6%. Free-mounted/dual-scale in bar/Pascal, connection down.

Virotec

Virotec-T threaded outlet, VT-S Red

Art. no.: 19045851

Virotech VT-S mechanical t-pipe/tapping clamp (mini-t, sprinkler-t) is used to create an outlet with internally threaded (BSPT) connection on steel pipe where holes can be drilled. Up to 16 bar maximum working pressure.

Food-grade longitudinally welded tubes, stainless steel 304L

Art. no.: 1227033

EN10357.

Profit

Grooved bend 90º, Galvanized

Art. no.: 1356041

Pipe fittings (GB, GT, GRC, GE, GRTR)
Used to make direction changes in grooved pipe systems.
The pipe parts can handle up to 20.7 bar maximum working pressure.

NordicFlow

Steel pipes, gray, NordicFlow, threaded, without collar, 3 m length

Art. no.: 1348850

Product description
NordicFlow® threaded pipe is manufactured according to EN 10255. The pipes are cold-formed, longitudinally welded and precision cut. C factor is 130 and the pipe is factory threaded in accordance with ISO 7/1- EN10226-1/EN10226-2. The pipes are blasted and wet painted in gray (RAL 7012) with 30 μm for corrosivity class C1 and C2. They are available in 6 and 3 meter lengths.
Areas of use
• Sprinkler system
• VS installations
o Heat
o Cooling
• Compressed air system

Corrosivity class

• Corrosivity classes C1 and C2.

Approval
NordicFlow® pipes are assessed by Sundahus and the construction product assessment.

Profit

Grooved split flange, Galvanized

Art. no.: 1356145

Split flange (GSF)
To create a transition from flanged pipe systems/components to worn -out systems.
PN 16 (EN 1092-2).
The split flange can handle up to 20.7 bar maximum working pressure.

Profit

MINI-T Sprinkler Cast with Threaded BSPT Red, a-collection

Art. no.: 1650535

Cast sprinkler-T with thread BSPT (GSTF)
Mini t-pipe/tapping clamp is used to create an outlet with threaded (BSPT) connection on steel pipe where holes can be drilled. Handles up to 20.7 bar maximum working pressure.

Steel pipes threaded with collar, hot-dip galvanized, SMS 326

Art. no.: 1222108

SS-EN 10255. SMS 326. Material S195. In lengths of 6 metres.

Copper gasket for pressure gauge

Art. no.: 19050279

Copper gasket for pressure gauge.

Grooved flange adapter, Red

Art. no.: 1356110

Grooved flange (GAF)
To create a transition from flanged pipe systems/components to worn -out systems.
PN 16 (EN 1092-2).
The worn flange can withstand up to 20.7 bar maximum working pressure.

Grooved lightweight pipes, longitudinally welded, hot-dip galvanized, 6m lengths

Art. no.: 1348841

Product description
NordicFlow® lightweight pipe is manufactured according to EN 10217-1 and is approved by FM. The pipes are cold-formed, longitudinally welded and precision-cut. C factor is 130 and the pipe is factory grooved according to OGS (Original Grooving System) in accordance with AWWA-C606. The pipes are blast-blasted and are available in two finishes. Epoxy powder coated pipes in gray (RAL 7012) with 70 μm for corrosivity class C1 and C2 and hot-dip galvanized surface treatment for corrosivity class C3. They are available in 6 and 3 meter lengths.
Areas of use
• Sprinkler system
• VS installations
o Heat
o Cooling
• Compressed air system

Corrosivity class

• Gray epoxy powder coated pipes with min. 70 μm in gray RAL 7012 is for corrosivity classes C1 and C2
• Hot-dip galvanized pipes with min. 55 μm EN 10240-A1 (Type E) pipe is for corrosivity class C3.

Approval
NordicFlow® Lightweight pipes have FM approval and the pipes are also FM approved together with PROFITS FITPRO (Ahlsell's quick coupling), butt coupling, and also with Victaulic 009N.
The painted pipes are tested in the salt spray test in accordance with UNI EN ISO 12944-6 for 480 hours with approved results.
In addition, Ahlsell has a certificate from SBSC and the products are assessed by Sundahus and the construction goods assessment.

Grooved lightweight pipes, longitudinally welded, powder coated, 3m lengths

Art. no.: 1348832

Grooved lightweight pipes, longitudinally welded, powder coated, 6m lengths

Art. no.: 1348823

Steel pipes, black, SMS 326, threaded without collar

Art. no.: 1220169

SS-EN 10255. SMS 326. Material S195. In lengths of 6 metres.

Steel pipes, black, SMS 326, non-threaded

Art. no.: 1220326

SS-EN 10255. SMS 326. Material S195. In lengths of 6 metres.

Steel pipes, blue, SMS 326 threaded without collar

Art. no.: 1221200

SS-EN 10255. SMS 326. Material S195.

Steel pipes, blue, SMS 326 threaded without collar. In lengths of 3 meters

Art. no.: 1221228

SS-EN 10255. SMS 326. Material S195.

Steel pipes threaded without collar, hot-dip galvanized, SMS 326

Art. no.: 1222173

SS-EN 10255. SMS 326. Material S195. In lengths of 6 metres.

Steel pipes non-threaded, red, SMS 327

Art. no.: 1224328

SS-EN 10255. Material S195.

Food-grade longitudinally welded tubes, stainless steel 316L

Art. no.: 1227039

EN10357.

a-collection

Pressure gauge 2040 plastic housing 63 mm, a-collection

Art. no.: 5113021

Standard version with plastic housing (ABS). Media contact parts of copper alloy. Measuring accuracy cl. 2,5%. Free-mounted. Dual-scale in bar/Pascal, connection down.

a-collection

Pressure gauge 2041 plastic housing 63 mm, a-collection

Art. no.: 5113374

Standard version with plastic housing (ABS). Media contact parts of copper alloy. Measuring accuracy cl. 2,5%. Free-mounted. Dual-scale in bar/Pascal, connection back.

a-collection

Pressure gauge 2240 plastic housing 100 mm, a-collection

Art. no.: 5113359

Standard version with plastic housing (ABS). Media contact parts of copper alloy. Measuring accuracy cl. 2,5%. Free-mounted. Dual-scale in bar/Pascal, connection down.

a-collection

Pressure gauge 2240 plastic housing 100mm MVP, a-collection

Art. no.: 5113349

Standard version with plastic housing (ABS). Media contact parts of copper alloy. Measuring accuracy cl. 2,5%. Free-mounted. Dual-scale in MVP/kPa, connection down.

a-collection

Pressure gauge 2750 stainless steel 100 mm, a-collection

Art. no.: 5113301

Liquid-filled case, stainless steel housing. Media contact parts of copper alloy. Measuring accuracy 1.0%. Free-mounted/dual-scale in bar/Pascal, connection down.

a-collection

Pressure gauge 2940 stainless steel 63 mm, a-collection

Art. no.: 5113321

Liquid-filled case, stainless steel housing. Media-contact parts of acid-resistant steel SS2350. Measuring accuracy 1.6%. Free-mounted/dual-scale in bar/Pascal, connection down.

a-collection

Pressure gauge 2940 stainless steel 100 mm, a-collection

Art. no.: 5113330

Liquid-filled case, stainless steel housing. Media-contact parts of acid-resistant steel SS2350. Measuring accuracy 1.0%. Free-mounted/dual-scale in bar/Pascal, connection down.

a-collection

Pressure Test Gauge 2750, a-collection

Art. no.: 5113346

Liquid-filled case, stainless steel housing. Media contact parts of copper alloy. Measuring accuracy cl. 1,0%. Free-mounted. Single-scale in bar, connection down.

a-collection

Pressure gauge 2040-100 with contact device, a-collection

Art. no.: 5113018

Industrial version with electrical contact. Media contact parts of copper alloy. Measuring accuracy cl. 1,0%. Free-mounted. Dual-scale in bar/Pascal. Integrated electrical contact. Max/min-function. Creep contact type 811.21, connection downwards.

Pressure gauge axial, A-Flex, accessory for expansion tank A-Flex

Art. no.: 5531592

Red scale marking for highest permissible pressure.

Pressure gauge radial, A-Flex, accessory for expansion tank A-Flex

Art. no.: 5532643

Red scale marking for highest permissible pressure.

NordicFlow

Steel pipes, gray, NordicFlow, threaded, without collar, 6 m length

Art. no.: 1348854

Virotec

Virotec-T threaded outlet, VT-S Galv

Art. no.: 19045848

a-collection

Transition nipple Double-grooved Stainless

Art. no.: 19039704

Double grooved stainless transition nipple to standard groove makes it easy to create a transition to standard groove stainless piping and components. EN 1.4307 / AISI 304L.

a-collection

Pressure gauge 100 mm

Art. no.: 19045853

Showing 52 of 111

Vårt sortiment inom värme och sanitet

Hos Ahlsell finner du ett brett sortiment inom värme och sanitet, även kallat VS, där du hittar allt från klämringskopplingar, slangkopplingar, duschkar, pumpar och minikök – till radiatorer och sprinklers.
Ahlsells breda sortiment inom VS är särskilt framtaget för dig som arbetar med vatten, rör och hantverkstjänster och har behov av produkter inom inomhusavlopp, ventiler, mätinstrument, badrum- och badrumsinredning, värmepumpar, reservdelar och rör. Här hittar du också bra produkter inom personlig skyddsutrustning för en säkrare arbetsplats.

Kända varumärken inom VS

Vi arbetar kvalitativt med att erbjuda ett varierat sortiment från kända och ledande varumärken med våra egna. Detta ger dig som kund på Ahlsell möjlighet att på egen hand välja de VS-produkter som motsvarar dina behov och önskemål.
Sortimentet är stort passar alla verksamheter som arbetar inom affärsområdet VS. Det finns över 100 000 produkter i vårt utbud och det går bra att både handla i butik såväl som online i vår webbshop.

Handla VS-produkter i vår webbshop

För att handla VS-produkter hos oss behöver du först ansöka om att bli kund. Det gör du enklast här på vår webbplats genom att klicka på “Bli kund" överst i menyn. Följ sedan instruktionerna för att få tillgång till dina konton. Under tiden du väntar på att ditt konto ska godkännas kan du fortfarande ta del av och se vilka artiklar och produkter vi har i vårt VS-sortiment. Om du redan är kund hos Ahlsell sedan tidigare så räcker det med att logga in på Mina Sidor.
Utöver vårt breda sortiment inom VS online hittar du också en rad olika guider, tips och nyheter relaterade till VS och våra VS-produkter. Självklart erbjuder vi även bra och användbar dokumentation och specifikationer om de VS-produkter vi säljer. Behöver du hjälp går det alltid bra att vända dig till en av våra säljare.

Hitta rätt VS-produkter på Ahlsell

På vår webbplats kan du använda sökfunktionen för att hitta de produkter inom VS du söker efter, men det går även bra att navigera sig fram till produkter från våra kategorisidor som du hittar genom vår huvudmeny. I sökresultaten har vi även ett användbart filter, vilket gör att du kan sortera och filtrera de VS-produkter du får fram i ditt sök utifrån egna kriterier.

Få hjälp med VS-produkter

Parallellt med vår webbshop hittar du också VS-produkter i våra fysiska butiker. Ahlsell har ett 100-tal butiker i hela Sverige, där våra duktiga säljare alltid står redo för att hjälpa våra VS-kunder. Våra butiker är anpassade lokalt till storlek och sortiment, och finns belägna på områden som är lättillgängliga. För att hitta den närmsta butiken klickar du på “butiker" överst i menyn och navigerar dig till den butik som är närmast. I vår webbshop kan du se lagersaldo för samtliga våra produkter inom VS, men också status i butikerna. Om den produkten du söker efter finns i våra butiker går det självklart bra att hämta produkten direkt istället för att lägga en order.

Så handlar du produkter inom VS

Fördelen med att välja Ahlsell för inköp av VS-produkter är att vi finns tillgänliga både online såväl som i butik. Som kund har du fördelen att själv välja om du vill handla VS i våra fysiska butiker eller i vår e-handel. Om du utför köp i vår webbshop kan du välja hur dina ordrar ska levereras. Det går även att hämta ut beställningar som du lagt online i våra butiker.

Mer än bara VS

I vårt utbud hittar du mer än bara VS-produkter. Vårt unika kunderbjudande ger professionella användare tillgång till ännu fler produkter och tjänster inom vatten, avlopp, ventilation, isolering, kyl, bygg, el, verktyg, maskiner, skyddsutrustning och mycket mer. På vår webb hittar du också en rad olika tjänster inom respektive affärsområde, inspirativa guider och nyheter. Ahlsell gör det enklare att vara proffs.