Order lines: 0

Ahlsell ProductsCooling

Cooling

Air conditioning

Liquid cooling unit

Control & monitoring systems

Installation accessories

Pipe and duct systems

Refrigerant, oil and refrigerants & heating media

Service equipment

Solar heating & HVAC accessories

Consumer products KCC

Ready To Install package

Are you looking for refrigeration products? Among Ahlsell's cooling products are compressors, cooling units, heat exchangers, air conditioning, heat pumps, liquid cooling units, computer cooling units, control, and monitoring systems, valves, installation accessories, pipe and duct systems, refrigerant, oil, cooling and heating media, service equipment, solar heating, plumbing accessories, and pool heating. We value reliable, long-lasting products. As a result, you can count on us to provide you with only high-quality cooling products. Take a look at the entire range of refrigerators we have in-store or online at in out webshop.

Safety Valves 3060

Safety Valves 3060

Art. no.: 7033461

Exhaust capacity of air is given for an exhaust temperature of 20°C and calculated as per EN 13136 : 2001.

Chiller / Heat Pump Control - Eliwell

Chiller / Heat Pump Control - Eliwell

Art. no.: 7182080

The main elements in the new Energy ST range are easy
installation and use: all of the most important functions in the user interface can
be activated by four buttons
The four-digit screen with 18 icons (of which seven can be configured) offers clear readability.
With the help of just four buttons it is possible to change the screen. select operating mode, activate manual defrosting, turn the regulator on/off and navigate menus in ordered folders.
Access to folders and parameters can be configured using three different levels: end-user, service and manufacturer.

Rivacold Controller

Rivacold Controller

Art. no.: 7434111

Spacer Cups Armafix Ultima UDP, with insulation thickness 13 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 13 mm

Art. no.: 43871312

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Coils 10W

Art. no.: 1816702

IP67 AC voltage. All coils have a connection terminal block

Pressure Transmitter

Pressure Transmitter

Art. no.: 41003366

Pressure Transmitter

Hitachi Styrsystem

Hitachi Styrsystem

Art. no.: 72424320

Hitachi Styrsystem

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Art. no.: 43814018

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >1000.0, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings. Length tolerance ± 1.5%.

WIFI Kit Innova PAC

WIFI Kit Innova PAC

Art. no.: 7125125

WiFi module for controlling Innova´s PAC devices via the EWPE smart app 7125125 fits 4-way cassette IGZCAPxxNI-1 and Channel-connected cassette IGZDUPxxNI-1 7125126 fits Floor / ceiling model IGZFCPxxNI-1

2 way manifold R744

2 way manifold R744

Art. no.: 71186622

R134a

Art. no.: 7122265

Comes with steel cylinder

Installer thermometer

Installer thermometer

Art. no.: 7065915

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Art. no.: 43871912

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Spacer Cups Armafix Ultima UDP, with insulation thickness 25 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 25 mm

Art. no.: 43872515

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Güntner Heating Rod GACC & GASC

Güntner Heating Rod GACC & GASC

Art. no.: 7443001

Heating rods for Güntner´s compact series

Ball valves K65 with schrader

Ball valves K65 with schrader

Art. no.: 17011945

Ball valves from Refrigera for trans-critical CO2 in fully welded construction with minimal pressure drop and connections of K65 copper pipe.
Temperature range: -40°C till +150°C.
No synthetic O-rings.
Teflon gaskets at valve seat and spindle.

Embraco starting relay

Embraco starting relay

Art. no.: 1253014

Check the model in current spare parts list

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Art. no.: 43802006

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Pipe Insulation Tubolit DG, (thermal insulation) 20mm instruction slotted

Pipe Insulation Tubolit DG, (thermal insulation) 20mm instruction slotted

Art. no.: 45206015

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

HIGHWALL INNOVA PAC

HIGHWALL INNOVA PAC

Art. no.: 7125210

Samsung Utomhusenhet A2W R290

Samsung Utomhusenhet A2W R290

Art. no.: 997083

Expansion Valves TCLE / TJRE / TERE / TIRE / THRE for R134a, R513A and R1234ze

Expansion Valves TCLE / TJRE / TERE / TIRE / THRE for R134a, R513A and R1234ze

Art. no.: 7170254

Max. test pressure 32 bar.
All valves are supplied in a set for assembly.
One turn of the static overheating protector corresponds to approx. 0.2 - 1,0K change of the total overheating protection, depending on the refrigerant and the current working range.
Cooling outputs given in KW with +40°C condensation and -10°C evaporation.

Vacuum Pump Class A1, A2, A2L & A3

Vacuum Pump Class A1, A2, A2L & A3

Art. no.: 22070067

Pro-Set VPS6DE spark-proof two-stage vacuum pump handles class A1, A2 and A3 cold media.
With gas ballast valve that accelerates the attainment of a deep vacuum. 220-240V 50/60Hz.

Vacuum Pump Class A1, A2, A2L & A3

Connecting Flange

Connecting Flange

Art. no.: 7170231

For Alco valves TCLE, TJRE, TERE, TIRE and THRE

Safety Valves 3030

Safety Valves 3030

Art. no.: 7031725

Exhaust capacity of air is given for an exhaust temperature of 20°C and calculated as per EN 13136 : 2001. Measuring unit kg/h.

Pipes shiny 5 m

Pipes shiny 5 m

Art. no.: 7120320

Copper pipes for cooling applications and cooling installations. The pipe’s inner surface is polished, clean and dry. After the cleaning process, the pipe ends are sealed in order to keep the inner surface of the pipe clean during transportation and storage. Condition: Hard. Delivery form: Straight lengths.

Maximum working pressure has been calculated based on a soft-annealed copper pipe with Rm = 200 N/mm2 and a safety factor of 3.5. The calculation only includes the copper pipe not couplings.

Teflon Gasket Rotalock

Teflon Gasket Rotalock

Art. no.: 11004603

For Refrigera rotalock valves

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Art. no.: 19025173

Battery-powered fully automatic radialpress Li-Ion for pressure connections Ø10-40 mm. Power for REMS press jaws mini. Swivel coupling for press jaws, with automatic locking. Electro-hydraulic drive with a powerful, battery-powered motor 14.4 V, 420 W, robust planetary gear, eccentric reciprocating pump and compact, highly effective hydraulic system, safety switches. Battery Li-Ion 14.4 V 1.3 Ah, quick charger Li-Ion/230 V, 50 – 60 Hz, 65 W.
In a stable metal box.

Press Tool Mini-Press ACC Li-Ion Basic-Pack, Rems

Embraco Sliding Units - Freezer R404A / R452A

Embraco Sliding Units - Freezer R404A / R452A

Art. no.: 4111925

Outdoor condensing units from Embraco • All machines contain high quality components to ensure trouble-free operation. • Optimized size to be able to be placed on a wall • Stackable construction • Robust sheet metal enclosure that can withstand harsh environments and high temperatures • Pull-out drawer allows you to access the entire machine from above • Starting equipment for thermostat operation or pump-down • As standard, lockable work switch, wiper, sight glass readable from the outside, HP, LP, compressor with crankcase heater and stepless fan control are included. All data are stated for R404A, +32 degrees ambient temperature and a subcooling of 3 K according to EN13215

Electronic Vacuum gauge Fieldpiece

Electronic Vacuum gauge Fieldpiece

Art. no.: 38022104

Loops Shiny

Art. no.: 7120080

Also other lengths for hoses are available upon request

Vortex Dual emptying unit Class A1, A2 and A2L

Vortex Dual emptying unit Class A1, A2 and A2L

Art. no.: 22070880

Draining unit from Inficon intended for emptying in both gas and liquid phases. 1 HP oil-free compressor. High-pressure switch shuts off the compressor at 38 bar. Supplied with drying filter. NOTE: Capacities are given as maximum values and depend on refrigerant and ambient conditions.

Bosch RG 4.0 Emptying Unit Class A1, A2, A2L and A3

Bosch RG 4.0 Emptying Unit Class A1, A2, A2L and A3

Art. no.: 7063664

Bosch RG4.0 is an emptying unit intended for emptying in both gas and liquid phases. Can be used for both A1, A2, A2L and A3 refrigerants. It can therefore be used excellently for emptying systems with combustible refrigerants such as R290 and R32. 1-cylinder, 1/2 HP oil-free piston compressor. High pressure switch with automatic reset (38.5 bar). Low pressure monitor automatically shuts off the emptying unit when emptying is complete. Easily accessible condenser enables easy cleaning. NOTE: Capacities are given as maximum values and depend on refrigerant and ambient conditions.

TRS600EH Emptying Unit Class A1, and A2L

TRS600EH Emptying Unit Class A1, and A2L

Art. no.: 7063667

TRS600EH is a powerful and high-performance emptying unit with 2-cylinder 2/3 HP oil-free compressor. Intended for emptying in both gas and liquid phases. Automatic low-pressure shut-off when emptying is completed. High pressure switch 38 bar. Approved for A1 and A2L ON-cool refrigerants with spark OFF switch Easy cleaning / replacement of suction filter without tools. NOTE: Capacities are given as maximum values and depend on refrigerant and ambient conditions.

Fieldpiece recovery unit Class A1 and A2L

Fieldpiece recovery unit Class A1 and A2L

Art. no.: 38022115

Vacuum pump class A1 and A2L

Vacuum pump class A1 and A2L

Art. no.: 38022161

Samon - Kalibreringsgaser och tillbehör

Samon - Kalibreringsgaser och tillbehör

Art. no.: 7384529

Samon - Kalibreringsgaser och tillbehör

Samon - Kalibreringsgaser och tillbehör

Ball Valves with Schrader 50 bar

Ball Valves with Schrader 50 bar

Art. no.: 7260300

Castels Polyhedra ball valves with shredders are compatible with A1, A2L and A3 refrigerants. They are made of a strong brass body with copper connections and a brass sealing hood. All internal parts are designed to guarantee zero leakage in or out of the valve. The valve is not flow direction dependent. Leak tested with helium at its calculation pressure. UL and CE approved.

Pressback Kit Rems Mini BMP

Pressback Kit Rems Mini BMP

Art. no.: 742783

System box L-Boxx incl. REMS Mini press jaws BMP as described, especially for the press sleeve system Conex Bänninger MaxiPro for cooling and air conditioning technology. The press contours for REMS Mini press jaws are system-specific and correspond to the press contours in each press sleeve system. Thus faultless system compliance, safe pressing. Fits all REMS Mini-Press models.

3-way Motor Ball Valves DUE

3-way Motor Ball Valves DUE

Art. no.: 5363196

Enclosure class: IP65
Pressure class: PN16
15°C till +95°C Brine temperature
Permitted ambient temperature: -20°C - +70 °C
Max operating pressure: 10 bar
Max differential pressure: 2.4 - 3.5 bar
Actuator torque: 11 Nm
Heat resistance: 5 W
Voltage: 230V/50Hz.
Setting time: 90 seconds

Temperature Sensor Other - Eliwell

Temperature Sensor Other - Eliwell

Art. no.: SN206000

AKS 12

Art. no.: 40009392

Air temperature sensor with average temperature range and average time constant

Spacer Cups Armafix FX-4 (3)-with increasing insulation thickness

Spacer Cups Armafix FX-4 (3)-with increasing insulation thickness

Art. no.: 43706012

Can be used together with AF/Armaflex hose series AF-4 and 3.
To carry and insulate coolant- and refrigerant-bearing at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Consisting of shell in a piece coated with glue-coated closure. With built-in water vapour block, which isas good as that of the insulation. Temperature range -50°C - +110 °C.
Built-in water vapour block, µ>10000
Can be used together with AF/Armaflex hose series AF-4 and 3.
Delivered with suitable pipe holder made of zinc-coated steel. When ordering by Article no., include holder
Please note! Spacer shell and holder are ordered separately

Vertical refrigerant Reservoir ALSRV

Vertical refrigerant Reservoir ALSRV

Art. no.: 6910230

ALSRV is a cooling agent reservoir for vertical installation from OCS, which in addition to the usual cooling agents, can be used in cooling agent systems with R410a since these withstand a max. working pressure of 45 bar and are hydrostatically tested at 67.5 bar. Supplied with exclusive rotary lid valves and safety valve. Note that ALSRV 1.0 to ALSRV 2.5 are equipped with solder connections
From size 12 l to 24 L, there is one 1/2" connection for a level alarm. If no level alarm is installed, a 1" connection must be with Article No. 7060560

Control Valve ALCO EX4 - 8

Control Valve ALCO EX4 - 8

Art. no.: 41003023

Series EX is step-motorised valves for fine control of the mass flow in HFC and HFO system. The valves can be used as high-pressure hexagonal valve, for spraying of liquid or hot gas by-pass.
PS = 45bar
Regulation range 10 - 100%

Nominal cooling effects in kW
R407C 43°C/4°C (dew point), UK 1K
R134a, R404A and R410A 38°C/4°C, UK 1K

Copeland ZX Scroll Unit Fridge

Copeland ZX Scroll Unit Fridge

Art. no.: 7161010

Future-proof your site with the help of the new generation of Copeland EazyCool ™ ZX chillers.
At present the unit is approved for R404A, R134a, R513A, R449A, R448A, R407A & R407F. More refrigerant will come in the future.
The new innovative control system gives you full control on whole process such as floating liquefaction and night securing of the fans.
Go to link up with Modbus RTU for remote control and monitoring.
The new design makes the unit blend well into the environment.
All units are fully equipped from the outset with viewing window, drying filter, tank, variable fan control and crankcase heater.
Built-in protections for overcurrent, phase sequence and unbalance between phases via the electronic control system.
The ability to control a cold room via the inbuilt governance that has outputs for defrosting, fan and a solenoid valve.

All data specified at the following temperatures and R449A as refrigerant

Ambient temperature +32°C
Evaporation -10°C
Suction line temperature 20°C
Audio data according to ISO3744 @10m (Night-Day)

Insulation for Ball Valves CO2

Insulation for Ball Valves CO2

Art. no.: 17017985

Insulation for ball valves

Samsung Utomhusdel PAC Standard

Samsung Utomhusdel PAC Standard

Art. no.: 997022

Pressure Regulator for Nitrogen

Pressure Regulator for Nitrogen

Art. no.: 38022154

Robust regulator for nitrogen from Advanced Test Products. Rubber-coated pressure gauges.

Pressure Regulator for Nitrogen

Rotalock Valves

Rotalock Valves

Art. no.: 17022017

Including Teflon gasket. For HFC and HFO refrigerants.

Refrigerant Distributor for Press

Refrigerant Distributor for Press

Art. no.: 17011965

Refrigerant distributor / Y-couplings including insulation bowls designed to be mounted with press systems in heating and cooling installations. Can be used with both B Maxi Pro and Zoomlock press couplings.

Nozzles

Art. no.: 7170176

For Alco valves TCLE, TJRE, TERE, TIRE and THRE

Showing 52 of 1017