Order lines: 0

Ahlsell Products Consumables Chemical technology and hygiene Oil - grease - cutting fluidsRustproofing and rust removers

Rustproofing and rust removers

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Rust oil crc 1066 frost chock

Rust oil crc 1066 frost chock

Art. no.: 560696

Fast-acting penetrating oil with freezing effect. Cracks up rust and corrosion through thermal shock. The cracks that occur allow the oil to quickly penetrate and release the corroded fixtures and components. For disassembly of screws, nuts, locks, hinges, valves, etc. Hazard labelling: extremely flammable.

COLD GALVANIZATION RUST OLEUM

COLD GALVANIZATION RUST OLEUM

Art. no.: 377175

Zinc based products of very high industrial quality for the professional protection of bare steel or improvements on galvanized/zinc coated surfaces after sanding, welding and other processes. Grey matt look - 90% zinc in the dry film (99% pure zinc) - for the protection of bare steel, free from rust, and galvanized surfaces - Ideal for reformation of larger areas - is consistent with DIN 50.976 (1983) - Resists 430 hours of salt spray test (DIN) - heat resistant up to 100º C - Can be handled after 3 hours (at 20º C) - Covering ability: 10.5 m²/l

Rust protection industry zinc

Rust protection industry zinc

Art. no.: 279594

A long-lasting rustproofing agent. Offers excellent properties when it comes to withstanding corrosion and mechanical wear & tear. Welded joints, screens, doors, beams, as well as other bodywork details. For improvement of damaged galvanised surfaces. 750 ml. Bulk. Labelling; environmentally hazardous.

Rust protection industry zinc

Rust protection Master Rust Protection Aluzinc

Rust protection Master Rust Protection Aluzinc

Art. no.: 471225

Master Rust Protection Aluzinc is used where rust protection is required on e.g. car bodywork, welding joints and all kinds of iron and steel surfaces where overpainting will not take place. Rust Protection Aluzinc resists salt and atmospheric corrosion. Air-drying single-component, zinc-rich, epoxyester-based primer for steel. Master Rust Protection Aluzinc provides a very good rust protection. Care should be taken when overcoating with alkyd-based top-coats as there is a risk of saponification with the zinc. Master Rust Protection Aluzinc contains over 75% zinc in the finished color film and provides a surface that does not need to be overpainted. Matt Aluminium, metal.

Assembly-paste

Art. no.: 471154

Universal grease, installation and start-up paste spray. Contains a combination of extremely pressure resistant fixed particles. Prevents wear, scratching and seizing. Simplifies installation of interference fits, seals and screws. It is recommended at slow slide movements under high pressure and a high temperature. Drive unit, open switches, torsion plates, rough controls, wire, etc.

Rust protection dinitrol 77b

Rust protection dinitrol 77b

Art. no.: 132324

Dinitrol 77B stainless wax in golden brown, strong, drying wax film. Long term protection of about 50-70um. Suitable for vehicles, boats and other iron and steel objects stored or transported under severe corrosion conditions. Excellent for sea transport. Golden brown/transparent. Spray in 500 ml. Hazard labelling: Extremely flammable.

Rust protection dinitrol ml

Rust protection dinitrol ml

Art. no.: 180840

Dinitrol ML thin penetrating cavities liquid with extremely high creep capability. Film thickness of about 10 µm. Intended for enclosed cavities and the outside of the chassis and joints before finishing with thicker wear protection. Also for internal and external corrosion protection of other iron and steel objects to be stored or transported. Beige/Brown. Hazard labelling: Highly flammable.

Rust protection crc

Rust protection crc

Art. no.: 471211

Rustprotect Soft Seal is a long lasting rust protector for metal surfaces. Used as a long-term protection against rust and corrosion under difficult conditions, outdoors and indoors. Leaves a dry, wax-like film. Can be sprayed, dipped or painted on. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Rust dissolver crc

Rust dissolver crc

Art. no.: 471319

Penetrates and effectively dissolves rust. Leaves behind a fixed lubricating film that prevents seizing and continued rusting together. Contains MoS₂, molybdenum sulphide, which gives the oil excellent lubrication qualities on wire, glide controls, pressure plates, etc. Safe on most varnishes, plastics and rubber. Hazard labelling: Highly flammable.

Protective rust primer

Protective rust primer

Art. no.: 288748

Rust-Oleum Hard Hat rustproofing base paint penetrates into the rusty surface and prevents continued corrosion. Can be repainted after 10 minutes but within 1 hour (or alternatively after 48 hours), can be handled after 30 minutes. Designed for bare or slightly rusty steel. Lead- and chromium-free. Hazard labelling: Extremely flammable, irritant,harmful to health.

Protective rust primer

Protective rust primer master zink

Protective rust primer master zink

Art. no.: 163797

Cold galvanisation on spray or can. The paint contains more than 90% zinc in the ready colour film, so the resulting surface corresponds to hot-dip galvanisation. Hazard labelling: harmful to health, environmentally hazardous.

Protective rust primer master zink

Rust-proof paint Ironside zinc spray

Rust-proof paint Ironside zinc spray

Art. no.: 377099

Anti-corrosive metal and heat-resistant to +450°C. High zinc content (95%). Re-paintable with acrylic based paints.
Equivalent to art. 124 235.

Rostlösare Ironside M0S2

Rostlösare Ironside M0S2

Art. no.: 377101

Rust dissolver which penetrates and lubricates quickly. Prevents squeaking and friction problems. Used for wire, demanding controls, sliding surfaces etc. and facilitates dismantling of metal parts and adhering screw joints. Penetrates in tight spaces as well and this way facilitates dismantling of components. Loosens adhering screw joints, this way making it possible for corroded connections such as screw joints, nuts, bolts, links etc. to move again.
Equivalent to 124 234.

Rostlösare Ironside M0S2

Spray color galvanizing matt gray

Spray color galvanizing matt gray

Art. no.: 304334

Zinc based products of very high industrial quality for the professional protection of bare steel or improvements on galvanized/zinc coated surfaces after sanding, welding and other processes. Cathodic protection and a decorative glimmering aluminium finish (80% zinc, 10% aluminium). A combination of protection and finish. For new bare stainless steel, and galvanised surfaces. Survives 340 hours of salt spray test (DIN). Heat-resistance to 450°C - Can be handled after 1 hour (at 20 C).

Rust protection Dinitrol Car 4941

Rust protection Dinitrol Car 4941

Art. no.: 180841

Hard, elastic, strong wax/bitumen film ca 500 μm. Intended as a long-term protection for spare parts, machinery, vehicles and other steel structures where there are high demands for long storage periods and for use during demanding transport. Provides good wear protection in the treatment of vehicles.

COLD GALVANIZATION ROCOL

COLD GALVANIZATION ROCOL

Art. no.: 216182

Cold galvanising 400 ml

COLD GALVANIZE RUST OLEUM

COLD GALVANIZE RUST OLEUM

Art. no.: 288746

Zinc based products of very high industrial quality for the professional protection of bare steel or reformation on galvanized/zinc coated surfaces after sanding, welding and other. The super-fast zinc base. Grey matt look - Can be handled after just 10 minutes (at 20ºC) - for the protection of bare and galvanized steel Resists 400 hours of salt spray test (DIN)-heat resistant up to 350°C ideal for production and construction works

Rust protection CRC Galva Brite zinc

Rust protection CRC Galva Brite zinc

Art. no.: 471323

Protective coating with shiny aluminum appearance. Single-component coating with zinc and aluminium. Protects against corrosion and forms a shiny surface with aluminum appearance. Good adhesion to metal surfaces. The result is a unique combination of elasticity and hardness.

Rust Protector Tectyl Multi Purpose Amber

Rust Protector Tectyl Multi Purpose Amber

Art. no.: 544232

Master Penetrant Rust Releaser Eco

Master Penetrant Rust Releaser Eco

Art. no.: 708162

rust dissolver WD-40

rust dissolver WD-40

Art. no.: 377274

A rust-removal oil from WD-40 with the classical Smart Straw function.
Features and advantages:
- Quick-penetrating rust oil
- Releases rusted parts
- Water repellent
- Releases dirt and other contamination
- Prevents rust and corrosion
- Temperature durability -20°C to +90°C
- Food grade NSF H2 #145375
Application areas: Bolts, locks, chains, bearings, tools, and anything else that can jam/rust

rust dissolver WD-40

Rostskydd Master Zinc Zincspray

Rostskydd Master Zinc Zincspray

Art. no.: 37947395

Showing 22 of 22