Feedback
AhlsellProductsElectricLighting 70-8370 Interior light luminairesPlafond luminaires and accessoriesPlafond luminaires
Westal
Ceiling luminaire LED Athena II
PLAFOND ATHENA II ON/OFF 12W ATHENA II ON/OFF 12W
Article number: Suppl. article no:
7504099
186-151
to see price and stock
Thin roof and wall plastic luminaire made of polycarbonate with opal glare protection, equipped with LED unit in on/off, pir sensor or master design.
On/off dimmable with front edge dimmer.
PIR sensor with up to 6m detection surface. The sensor has adjustable holding time and sensitivity. The luminaire can be connected as a master, which allows it to control other luminaires.
Master is controlled with a built-in microwave sensor that can be canceled as needed using dip switches on the drive. The luminaire can be connected as a master, which allows it to control other luminaires. At the maximum detection, the distance is about 6m.
NÖD = with a separate emergency light module with automatic self -test and status indication via green/red diode. In case of voltage loss, the luminaire shines for 3h via battery. The battle diet can easily be replaced via quick contact during maintenance and is available as a spare part.
On/off dimmable with front edge dimmer.
PIR sensor with up to 6m detection surface. The sensor has adjustable holding time and sensitivity. The luminaire can be connected as a master, which allows it to control other luminaires.
Master is controlled with a built-in microwave sensor that can be canceled as needed using dip switches on the drive. The luminaire can be connected as a master, which allows it to control other luminaires. At the maximum detection, the distance is about 6m.
NÖD = with a separate emergency light module with automatic self -test and status indication via green/red diode. In case of voltage loss, the luminaire shines for 3h via battery. The battle diet can easily be replaced via quick contact during maintenance and is available as a spare part.
- Article number: 7504099
- Suppl. article no: 186-151
- Ean no: 7393041861512
- Material class QT7000
Technical data
- Packagin Size: 1 ST/10 ST/60 ST/180 ST
- Design: on/off
- Max. system power: 12 W
- Rated luminous flux according to IEC 62722-2- 1: 1073 lm
- Colour temperature: 3000 K
- Housing colour: White
- Nominal voltage: 220-240 V
- Voltage type: AC
- Beam angle: Extreme wide beam >80°
- Housing material: Plastic
- Material cover: Plastic, opal
- Lamp type: LED exchangeable
- Outer diameter: 250 mm
- Height/depth: 42.5 mm
- Colour rendering index CRI: 80-89
- Protection class according to IEC 61140: II
- Degree of protection (IP): IP44
- Type of control gear: LED operating device current-controlled
- With control gear: Yes
- With movement sensor: No
- With light sensor: No
- With light source: Yes
- Suitable for surface mounting: Yes
- Suitable for suspended mounting: No
- Suitable for built-in mounting: No
- Light outlet: Direct
- Light distribution: Symmetric
- Suitable for emergency lighting: No
- Suitable for ceiling mounting: Yes
- Type of grid: None
- Impact strength: IK10
- Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24: No
- Number of poles: 3
- Dimming phase cut-off (trailing edge): Yes
- Dimming phase cut-on (leading edge): Yes
- Dimmable: Yes
- Conductor cross section: 2.5 mm²
- Luminaire efficacy: 89 lm/W
- Suitable for light line configuration: No
- Rated life time L70/B50 at 25 °C: 100000 h
- Rated ambient temperature according to IEC 62722-2-1: -25-50 °C
- Type of wiring: Suitable for loop-through wiring
- Colour consistency (McAdam ellipse): SDCM3
- Luminous flux adjustable: Continuously variable
- Max. number of luminaires per miniature circuit breaker B16 (MCB): 132
- Max. number of luminaires per miniature circuit breaker C16 (MCB): 145
- Suitable for wall mounting: Yes
- Connection type: Push-in clamp
- REACH Date: 2023-06-08
- Energy efficiency class of the built-in lamp: A++, A+, A (LED)
- REACH Information obligation: No