Order lines: 0

Ahlsell Products Tools & Machines Welding and GasFiller Material

Tillsatsmaterial

Stainless Steel

Hard welding rod

Gas welding wire

Ahlsell's range of tools and machines includes power tools, hand tools, plumbing tools, hand, torch and flashlights, measuring and marking tools, cutters, grinding and brushes, brushes, rollers, wallpaper, and painting tools, cutting tools, welding and gas, compressed air, hydraulics, pneumatics, rubber cloths and vibration damping, cleaning tools, property and office, tools and garden products. We value reliable products that last a long time. That is why you will find tools and machines of high quality in our range. Explore all our tools and machines online or in one of our stores.

Electrode esab ok 46.16

Electrode esab ok 46.16

Art. no.: 119398

OK 46.16 is an all-current rutile universal electrode with good weldability. The electrode ignites and re-ignites very easily, and the weldability is good in all positions, even descending vertical. OK 46.16 welds relatively cold and can therefore be used for overlaying relatively large gap openings. OK 46.16 is recommended for welding of bottom strands in facade joints, for tack welding and for assembly welding. OK 46.16 is recommended for steels: S235JR (SS1311), S235JRG2 (SS1312), SS1330, SS1331, SS1411, S275JR (SS1412), S275J2G3 (SS1414), SS1430, P265GH (SS1431), SS1434 as well as ship steel in A, D and E-quality in ordinary strength grades.
Current type AC, DC+ - OCV 50 V.
Code in accordance with: SS standard: SFA/AWS A5.1 E7014. EN ISO 2560-A E 38 0 RC 11.
Approval: DB 80.039.03 - VdTÜV 02528 - CE EN03479.

Esab ok autrod 12.51

Esab ok autrod 12.51

Art. no.: 119478

Autrod 12.51 is a copper plated, silicon-manganese alloyed G3Si1/ER70S-6 wire electrode for gas metal arc welding of non-alloyed and fine grain treated steel types in general structures, pressure vessel manufacturing and shipbuilding. The wire has a precisely controlled chemical composition and a unique surface treatment technique, which provides a high welding quality at high feed rates and high welding currents. Shielding gas: Ar+20% CO² (M21) or CO² (C1) Current type DC(+). Code in accordance with: SFA/AWS A5.18 ER70S-6. EN 440 G3Si1. Approval: ABS 3SA, 3YSA - BV SA3YM - DB 42.039.06 - DNV III YMS - DS EN 440 - SS EN 440 - VdTÜV - *) fine flushing.

Esab ok autrod 12.51

Cored Wires Kobelco Dw 316lp

Cored Wires Kobelco Dw 316lp

Art. no.: 499860

Flux Meltolit 770 Paste

Flux Meltolit 770 Paste

Art. no.: 305474

Meltolit 770 powder and paste is a fluxing agent for brazing with silver solder of copper, stainless steel and normal steel. The purpose of the fluxing agent is to break metal oxides on the metal to achieve bonding of the silver solder on the combination of metals copper, steel, brass, etc. Very good reactivity and fluidity. Also used for brazing with silver phosphor copper solder to join copper to brass. For use, mix 770 powder with distilled water and a little denatured alcohol.

Flux Meltolit 770 Paste

Flux Meltolit 850 Powder

Flux Meltolit 850 Powder

Art. no.: 490036

Meltolit 850 powder and paste is a fluxing agent for brazing and/or welding with brass, bronze on unalloyed and low-alloy steel and also on brass and copper. The purpose of the fluxing agent is to break metal oxides on the metal to achieve bonding of bronze/brass with the solder Meltolit 850/900 on the combination of material copper, steel, brass, etc. Good reactivity and fluidity. For use, mix 850 powder with distilled water.

Cored Wires Kobelco Dw 329a

Cored Wires Kobelco Dw 329a

Art. no.: 499869

Tig wire Elga Cromatig 316LSI

Tig wire Elga Cromatig 316LSI

Art. no.: 393230

Cromatig 316LS i is a TIG wire for welding stainless, low carbon steels of type 18% Cr / 8% Ni / 3% Mo and Nb or Ti stabilized steel grades up to a operating temperature of 350 ° C. The increased silicon content gives very good welding properties.

Solder Wire Stannol HF 32 BF

Solder Wire Stannol HF 32 BF

Art. no.: 509817

Solder Wire Stannol HF 32 BF

Solder Wire Stannol HF 32 BF

Esab ok tigrod 12.64

Esab ok tigrod 12.64

Art. no.: 254902

OK Tigrod 12.64 is a copper-plated Si-Mn- alloyed type G4Si1/ER70S-6 welding wire for TIG-welding. It is intended for non-alloyed and fine grain treated structural steel, with requirements of high-strength welds such as in pressure vessels. The wire’s silicon content ensures pore-free welds, even in so-called non-sealed material. TIG-welding is normally performed with pure argon as shielding gas, and is the welding method that most simply ensures a perfect and thoroughly welded root strand in V-joints and thin-walled pipes. Current type DC(-).

Code in accordance with: SFA/AWS A5.18 ER70S-6. EN 1668 W4Si1.
Approval: ABS 3, 3Y - DNV III YM(I1) - GL 3Y - LR 3 3Y - UDT DIN 8559 - VdTÜV.

Electrode Elga P48M

Electrode Elga P48M

Art. no.: 392602

P 48M is a basic low hydrogen content DC+ electrode suitable for welding high strength low alloyed steel. It is especially adapted for welding in difficult environments and for steel with high impurity levels. The electrode operates with a particularly stable arc and shows no tendency to ''freeze'', even on low current. Root passes can be welded with DC-. P 48M has very good fracture toughness at temperatures down to -40 °C.

Approval: CE, DNV 4Y40 H5, LR 4Y40 H5, GL 3Y40 H5, RINA 3Y H5, MRS 4Y40 H5.

Electrode Elga P48M

Electrod Elga Cromarod 316L

Electrod Elga Cromarod 316L

Art. no.: 392633

Cromarod 316L is a positional rutile electrode suitable for welding of low carbon, austenitic, acid resistant 19% Cr / 12% Ni / 3% Mo steel type SS 2343 or similar. Excellent welding properties with a soft arc, minimal sparks, even bead appearance and self releasing slag. The electrode can even be used for welding of Nb or Ti stabilised steel with operational temperatures of under 400°C. Cromarod 318 is recommended at higher temperatures.

solid wire Elga Cromamig 316LSI

solid wire Elga Cromamig 316LSI

Art. no.: 392690

Cromamig 316LS i is primarily intended for welding of low carbon, molybdenum-alloyed, acid-proof, austenitic stainless steel SS 2343 and the like. It is also useful for standard-grade Nb or Ti stabilized steel of corresponding type, provided that the operating temperature is below 400 ° C. The increased silicon content provides better arc stability and user friendliness, which improves the string appearance, especially in the short arc range.

Phosphorus cups Meltolit 5P

Phosphorus cups Meltolit 5P

Art. no.: 490027

Silver copper phosphorous solder with 5% Silver which is mainly used for copper pipe details and copper plate. Silver copper phosphorous solder Meltolit 5P is for hard soldering copper, brass and to a certain degree, steel. The product contains phosphor which breaks “the oxide" in the base material, for connecting copper pipes, copper connectors and HVAC/Cooling details! For soldering of brass details a different welding flux is required Meltolit 770 type. (HVAC approved)

Electrode esab ok 48.05 vac-pack

Electrode esab ok 48.05 vac-pack

Art. no.: 301907

OK 48.05 is a basic, allround electrode for non-alloyed and micro-alloyed carbon-manganese steel with very good welding properties, especially when direct current + pole is used. OK 48.05 provides a tough and crack-proof weld. It has good welding properties even at low weld currents, which is an advantage when welding root strands in pipes, for example. OK 48.05 provides the same, good weld quality as OK 48.00 but it welds with a somewhat softer and wider arc. Current type DC+. Code in accordance with: SFA/AWS A5.1 E7018. EN ISO 2560-A E 42 4 B 42 H5.

Electrode esab ok 46.00

Electrode esab ok 46.00

Art. no.: 119396

OK 46.00 is a rutile, all-current electrode that provides an even strand appearance in all weld positions, including vertically downwards and with an easily removed slag. The electrode ignites and re-ignites very easily, which makes it ideal for short welds and tack welding. It is also suitable for overlaying atop large gap openings. It is recommended for structures made of thin and middle-coarse materials with varying joint types and welding positions. OK 46.00 is among the most suitable for welding in zinc galvanised material, and is relatively insensitive to rusty or otherwise contaminated materials. OK 46.00 is recommended for ordinary carbon steel, and for A quality ship steel in ordinary strength grades. Current type AC, DC+ - OCV 50 V. Code in accordance with: EN ISO 2560-A E 38 0 RC 11. SFA/AWS A5.1 E6013. Approval: DB 10.039.05 - DNV 2 - GL 2 - R 2 - VdTÜV 00623 - CE EN 13479 - Class NK KMW2 - BKI 2.

Electrode esab ok 48.00

Electrode esab ok 48.00

Art. no.: 249763

OK 48.00 is a very safe direct current electrode for non-alloyed and micro-alloyed carbon-manganese steel. It provides a tough and crack-proof weld, is quick-welded in rising vertical position. OK 48.00 is, within wide limits, unsensitive to the base material’s composition. When welding bottom strings where full penetration is needed (for example, PIPE welding), it may be appropriate to connect the electrode to the minus pole. OK 48.00 is suitable for welding of such structures where demanding current states cannot be avoided. Current type DC+(-).
Code in accordance with: SFA/AWS A5.1 E7018. EN ISO 2560-A E 42 4 B 42 H5. Approval in accordance with: ABS 3H5, 3YH5 - DB 10.039.12 - DNV 3 YH5 - GL 3Y H5 - LR 3, 3Y H5 - VdTÜV 00690 - CE EN 13479.

Electrode Elga P48P

Electrode Elga P48P

Art. no.: 509942

P 48P is a basic low-hydrogen and all-round, normal yield electrode with a thin case, specially developed for welding of pipes. It is recommended for welding of non-alloyed, manganese-alloyed and micro-alloyed steel. P 48P has a very stable arc, which gives the electrode a large tolerance box for variations in gap openings and edge displacement. It is very user-friendly and safe to use in difficult situations. The root strings come out even and give a slightly convex string profile. Fill and cover strings lay evenly against the base material. These properties minimize the need forsanding, which reduces environmental problems with grinding dust and noise. It ultimately provides high productivity and reduced costs.

Electrode Elga P48P

Electrode Elga Cromarod 309MoL

Electrode Elga Cromarod 309MoL

Art. no.: 392629

Cromarod 309MoL is a stainless over strength rutile electrode which gives weld metal type 23% Cr / 12% Ni / 2.5% Mo. The high strength and ferrite content of the weld metal allows for dilution of the weld metal mild strength side creating core and warmth cracks.

Area of application:
- Welding mixed joints between medium or low strength steel against stainless steel.
- Welding on buffer layers against medium and low strength steel against supplementary strings of Cromarod 316L.
-Welding of ferrite-martensitic Stainless Steel.

Electrode Elga Cromarod 309MoL

Electrode esab ok 48.00

Electrode esab ok 48.00

Art. no.: 119405

OK 48.00 is a very safe direct current electrode for non-alloyed and micro-alloyed carbon-manganese steel. It provides a tough and crack-proof weld, is quick-welded in rising vertical position. OK 48.00 is, within wide limits, unsensitive to the base material’s composition. When welding bottom strings where full penetration is needed (for example, PIPE welding), it may be appropriate to connect the electrode to the minus pole. OK 48.00 is suitable for welding of such structures where demanding current states cannot be avoided. Current type DC+(-).
Code in accordance with: SFA/AWS A5.1 E7018 EN. ISO 2560-A E 42 4 B 42 H5.
Approval: ABS 3H5, 3YH5 - DB 10.039.12 - DNV 3 YH5 - GL 3Y H5 - LR 3, 3Y H5 - VdTÜV 00690 - CE EN 13479.

Electrode esab ok 63.30

Electrode esab ok 63.30

Art. no.: 119428

OK 63.30 is an extra low-carbon content stainless electrode of type 18Cr 12Ni 2,8Mo. OK 63.30 is intended for welding stainless or so-called acid-resistant steels such as X3CrNiMo17-13-3 (SS2343), X2CrNiMo18-14-3 (SS2353) or equivalent steel in accordance with other standards. The electrode is even suited for titanium and niobium-stabilised stainless 18-12 steels of type SS2344 and SS2345 if very corrosive conditions are not present. The electrode ignites and re-ignites very easily and is very short-circuit proof while welding. It provides very beautiful strands and the slag is self-loosening. Fragile dimensions up to Ø 3.2 mm can be welded in all positions while the coarser dimensions should only be used in horizontal position. Current type DC+, AC OCV 50 V.
Code in accordance with: EN 1600 E 19 12 3 L R 1 2. SFA/AWS A5.4 E316L-17. Werkstoff No. 1.4430. CSA W48 E316L-17.
Approval: ABS E316L-17 - CWB CSA W48 - DB 30.039.06 - DNV 316L - GL 4571- LR 316L - Sepros UNA 409820 VdTÜV 00262 - CE EN 13479.

Electrode esab ok 83.28 vac-pack

Electrode esab ok 83.28 vac-pack

Art. no.: 248411

OK 83.28 creates a chrome-alloyed weld for welding e.g. wheel tracks, axles, rollers, rails, track intersections, connection parts, cast steel cogwheels and wheel tracks and wheels for cranes and traverses. Joint welding of hardenable steel is another type of application. Current type AC, DC+ OCV 70 V
Code in accordance with: EN 14700 E Z Fe1.
Approval: DB 82.039.01 - Seproz UNA 485155 - CE EN 13479.

Esab ok aristorod 12.50

Esab ok aristorod 12.50

Art. no.: 234347

OK AristoRod 12.50 is a non-copper plated, manganese alloyed solid wire for welding such non-alloy steel as general structural steel, pressure vessel steel and steel for shipbuilding, and for fine-grain treated carbon steel for similar application areas with a maximum strain of 420 MPa. OK AristoRod 12.50 is surface treated with ESAB’s unique ASC method - a completely new coating technique, which reaches new levels for MAG welding with regards to design and versatility, especially for robot welding and automated welding. Characteristic advantages are exceptionally good start qualities. Trouble-free feeding at high feed rates and long feeder cables, a very stable arc at high welding currents, little spray, low smoke emission, reduces wear of contact nozzle and improved protection against corrosion on the wire. Fine flushed. Shielding gas: CO² (C1) or Ar+20%CO²(M21). Current type DC(+).
Electrode class in accordance with: SFA/AWS A5.18 ER70S-6 EN 440 G3Si1.
ABS 3SA, 3YSA - BV SA3YM - CWB CSA W48 - DB 42.039.29 - DNV III YMS - DS EN 440 - GL 3YS - LR 3S, 3YS - Ü 42.039/1 - VdTÜV

Esab autrod ok 12.64

Esab autrod ok 12.64

Art. no.: 253208

OK Autrod 12.64 is a copper plated, silicon-manganese alloyed G4Si1/ER70S-6 wire electrode for gas metal arc welding of non-alloyed and fine grain treated steel types in general structures, car industry, pressure vessel manufacturing and shipbuilding. The higher silicon and manganese content contributes to a more porous weld and better wetting against the base material, as well increasing the weld’s strength. Fine flushed. Shielding gas: Ar /CO² mixed gas(M21) or pure CO² (C1). Current type DC+.
Code in accordance with: SFA/AWS A5.18 ER70S-6. EN 440 G3Si1.
Approval: ABS 3SA, 3YSA - BV SA3YM - DB 42.039.06 - DNV III YMS - DS EN 440 - GL 3YS - LR 3 3YS - PRS 3YS - SFS EN 440 - SS EN 440 - VdTÜV .

Solder Wire Stannol HS 10 BF

Solder Wire Stannol HS 10 BF

Art. no.: 509821

Solder Wire Stannol HS 10 BF

Solder Wire Stannol HS 10 BF

Solder Wire Stannol HS 10 BF

Solder Wire Stannol S 321 BF

Solder Wire Stannol S 321 BF

Art. no.: 509825

Solder Wire Stannol S 321 BF

Solder Wire Stannol S 321 BF

Welding wire esab ok tubrod 14.11

Welding wire esab ok tubrod 14.11

Art. no.: 293730

OK Tubrod 14.11 is a metal powder filled pipe electrode for welding ordinary and high-tensile steel. it is specially developed for robot or mechanical welding, especially in thin metal sheets. The electrode has a large parameter range, which i.a. makes it suitable for welding with low voltage spray arc, which reduces the risk of burning in situations where the fit varies. OK Tubrod 14.11 functions in all modes, for both manual and mechanical welding, in thin and medium coarse sheet thicknesses and very high weld metal quality. In relation to other metal powder filled pipe detectors, OK Tubrod 14.11 gives higher output and higher welding rate. OK Tubrod 14.11 has remarkable start properties and generates very little spatter. Safety glass: Ar/20%CO2 (M21). Current type DC+.
Code in accordance with: SFA/AWS A5.18 - E70C-6M H4 - EN ISO 17632-A - T 42 4 M M 3 H5.
Approval: ABS 4Y400SA - BV S 3Y M HH - DB 42.039.28 - DNV IIIY40 H5 - LR 4Y40S H5 - VdTÜV 10010 - CE EN 13479 - GL 4Y40H5S (M21).

Pro dc carbon esab

Pro dc carbon esab

Art. no.: 245459

Carbon rod for arc gouging.

Esab welding wire 308lsi

Esab welding wire 308lsi

Art. no.: 252584

OK Autrod 308LS i is an extra low-carbon stainless steel wire electrode for arc welding of austenitic stainless steels containing approx. 19 Cr and 10 Ni. OK Autrod 308LS is recommended for example for AISI 304, 404L and X5C rNi18-10 (SS2332, W. # 1.4301) and SS2333 or equivalent stainless steel according to other standards. The high silicon content results in good welding properties. For thicknesses less than 3 mm, short arc welding is more easy to handle than spray arc welding. Bottom strings in bevelled joints are also most easily carried out with short arc welding, while remaining strings can be performed more quickly through horizontal welding with spray arc welding. Current type DC(+). Code in accordance with: EN ISO 14343 G 19 9 LSi. SFA/AWS A5.9 ER308LSi. Werkstoffnummer ~1.4316. Approval: DB 43.039.01 - DNV 308L MS (-60ºC) - UDT DIN 8556 - VdTÜV 04267 - Ü 43.039/1.

Esab welding wire 316 lsi

Esab welding wire 316 lsi

Art. no.: 244730

OK Autrod 316LS is an extra low-carbon stainless steel wire electrode for arc welding of stainless steels containing approx. 18 Cr, 12 Ni, 3 Mo. Is recommended for example for AISI 316, 316L. and 1.4436 (SS2343), 1.4435 (SS2353) or equivalent stainless steel according to other standards. The increased silicon content results in better welding properties. For thicknesses less than 3 mm, short arc welding is more easy to handle than spray arc welding. Bottom strings in bevelled joints are also most easily carried out with short arc welding, while remaining strings can be performed more quickly through horizontal welding with spray arc welding Safety glass: Ar + 1-3% O² (M13). Current type DC(+).
Code in accordance with: EN ISO 14343 G 19 12 3 LSi. SFA/AWS A5.9 ER316LSi. Werkstoffnummer ~1.4430
Approval: DB 43.039.05 - DNV 316L MS (-120ºC) - UDT DIN 8556 - VdTÜV 04268 - Ü 43.039/1 - CE EN 13479.

Esab welding wire 5356 (18.15)

Esab welding wire 5356 (18.15)

Art. no.: 246039

OK Autrod 5356 is the most used alloy type for welding aluminium alloys. OK Autrod 5356 is a magnesium alloyed aluminium wire for MIG welding of Al-Mg-alloys containing up to 5% Mg, but is also used for its relatively high strength. Al- alloys of type 5XXX, that are welded with OK Autrod 5356 and creates a weld of more than 3% Mg, can be prone to cracks caused by stress corrosion at working temperatures exceeding 65°C. The alloy cannot be heat treated. Current type: DC(+).
Code in accordance with: SFA/AWS: A5.10 ER5356. EN ISO 18273 S Al 5356 (AlMg5Cr(A)). Approval: ABS ER 5356 for dim. 1.2 mm -

CWB AWS A5.10
- DB 61.039.01- DNV 5356 (WB) -

GL S-AlMg 5

- LR WB/I-1- VdTÜV 04664

- Ü 61.039 - CE EN 13479

Esab ok tubrod 14.12

Esab ok tubrod 14.12

Art. no.: 185921

OK Tubrod 14.12 is a metal powder filled tubular electrode without slag formation, particularly suited to fillet welding in regular and general structural steel, with a tensile strength of max 510 N/mm². OK Tubrod 14.12 has a very broad application area equivalent to that of non-alloy electrodes and wire electrodes, but with higher productivity. The dimensions Ø1.2 and Ø1.4 mm are best suited for short arc welding in vertical and underlay positions and 1.2 mm is very good in root passes at low current levels. OK Tubrod 14.12 is relatively insensitive to primer and ember peelings. When using Ar+20% CO² (M21) Shielding gas, reported typical values are: CO² or Ar+20%CO² (M21). Current type DC(+-).
Code in accordance with: SFA/AWS A5.18 E70C-6M, E70C-6C. EN ISO 17632: T 42 2 M M 1 H10, T 42 2 M C 1 H10. Approval: ABS 3SA, 2YSA - BV SA3YM - DB 42.039.24 - DNV IIIYMS - GL 3YS - LR 3S, 3YS - RINA 3Y S - VdTÜV 06649 - CE EN 13479.

Cored wires ESAB Shield-Bright 316L X-tra

Cored wires ESAB Shield-Bright 316L X-tra

Art. no.: 185813

Shield-Bright 316L X-tra is a stainless steel, extra low-carbon, rutile type tubular electrode intended for welding acid proof stainless steel types 18-20Cr10-14Ni2-3Mo such as 316 and 316L or equivalent steel in accordance with other standards. The weld’s low carbon content creates good resistance to inter-crystalline corrosion, but also against spot corrosion and most types of corrosion in reducing and neutral solutions. Shield-Bright 316L X-tra can also be used for welding the niobium-stabilised steels if these will not be worked on in temperatures exceeding 400°C. The tubular wire is used in a horizontal position (for vertical welding upwards and downwards, see Shield-Bright 316L). Shield-Bright 316L X-tra provides cost-effective welding with high welding speed. The welding strands become very even and smooth, and the transition between the base material and the weld becomes soft and without a melting trough. The slag is self-loosening and weld spatter does not occur when using mixed gas. Shielding gas: Ar+20%CO² or CO² (C1). Current type
DC+.
Code in accordance with: SFA/AWS A5.22 E316LT0-1. EN 12073 T 19 12 3 L R C 3. Approval: ABS US, KR: E316LT0-1 (C1) -

VdTÜV 06612 -

DNV KR: 316L (C1) - KR KR: RW316LG (C1) -

LR KR: 316L (C1).

Esab ok tubrod 15.14

Esab ok tubrod 15.14

Art. no.: 214230W

OK Tubrod 15.14 is a rutile type tubular electrode that provides a weld melt that is easily controlled in all welding positions, with good arc stability and easily removed slag. OK Tubrod 15.14 is suitable for position welding in structures that are not possible to place in positioners. Vertical welding upwards and downwards are best performed with dimensions 1.2 and 1.4 mm. The 1.4 mm power range very well covers the various electrode dimensions, and are therefore useful when there are mixed welding positions. OK Tubrod 15.14 is graded as Grade 3 with all significant classification associations. When using CO2²(C1) Shielding gas, reported typical values are: Ar+20% CO² (M21) or CO² (C1) Current type DC+
Code in accordance with: SFA/AWS A5.20 E71T-1, E71T-1M. EN 758 T 46 2 P M 2 H10, T 46 2 P C 2 H10.
Approval. ABS 3SA 3YSA (M21 and C1) - BV SA3YM (M21 and C1) - DB 42.039.05 (M21 and C1) - DNV IIIYMS (M21 and C1) - GL 3YS (M21 and C1) - LR 3S 3YS (M21 and C1) - VdTÜV 07651 - ENN 13479.

Welding wire filarc pz6113

Welding wire filarc pz6113

Art. no.: 155046

FILARC PZ6113 is a rutile type, flux-filled tubular electrode specially developed for high productivty welding in position. FILARC PZ6113 can be described as a universal electrode and is also used by shipyards across Europe. One of the reasons for this is that 1.4 mm welds well in one setting in all positions. Position welding is performed in the spray arc area for the respective electrode dimensions at relatively high current strengths. The electrode can effectively be used in combination with ceramic root support. When using Ar+20% CO² (M21) Shielding gas, reported typical values are: Ar +20% CO²(M21) or CO² (C1)
Current type
DC+. Code in accordance with: EN 758
T 42 2 P C 1 H5. SFA/AWS
E71T-1C
.

Filarc pz6138 1.2mm 16kg

Filarc pz6138 1.2mm 16kg

Art. no.: 185842

FILARC PZ6138 is a rutile type tubular electrode containing approx. 1% nickel that contributes to providing the weld with a impact resistance requirement down to -60°C and is CTOD tested at -10°C. PZ6138 is well-established in the offshore industry on account of its good mechanical properties and has extremely good welding properties with a soft, stable arc with little visible spray in all welding positions. It is also suitable in combination with ceramic root support in open V joints. It is intended for low-alloyed and high-strength steel, for example in offshore, pressure vessels and other demanding welding constructions. Shielding gas: Ar+20% CO² (M21) Current type DC+
Code in accordance with: SFA/AWS A5.29 E81T1-Ni1MJ H4. EN 758 T 46 5 1 Ni P M 1 H5.

Esab ok tigrod 316lsi

Esab ok tigrod 316lsi

Art. no.: 110302

OK Tigrod 316LS is an extra low-carbon stainless steel welding wire for TIG welding of stainless steels containing approx. 18 Cr, 12 Ni, 3 Mo. Is recommended for example for AISI 316, 316L. and 1.4436 (SS2343), 1.4435 (SS2353) or equivalent stainless steel according to other standards. The increased silicon content results in better welding properties. Current type DC(-).
Code in accordance with: EN ISO 14343 W 19 12 3 LSi. SFA/AWS A5.9 ER316LS. Werkstoffnummer ~1.4430
Approval: DB 43.039.06 - DNV 316L - UDT DIN 8556 - VdTÜV 05336 - Ü 43.039/1 - CE EN 13479.

Esab ok tigrod 4043

Esab ok tigrod 4043

Art. no.: 100976

.OK Tigrod 4043 is a silicon alloyed aluminium wire, type AlSi5, for TIG welding of AlMgSi and AlSi alloys with silicon contents up to 7%. The wire is recommended, for example, for EN-AW-6063 (SS 4104), EN-AW-6082 (SS 4212), ENAW-42000 (SS 4244), EN-AW-42100 (SS 4245) and equivalent Al alloys in accordance with other standards. The weld is highly resistant to cracks. Colour compatibility between the welds and the base material with anoxification is less good. As in all aluminium welding, a high discipline applies with regards to purity and minimisation of oxide layers on joint surfaces and additives. Current type AC
Code in accordance with: SFA/AWS A5.10 R4043. EN ISO 18273 S Al 4043 (AlSi5). EN ISO 18273 S Al 4043A (AlSi5(A)).
Approval: CWB AWS A5.10 - DB 61.039.06 - CE EN 13479.

Esab ok tigrod 5356

Esab ok tigrod 5356

Art. no.: 100972

OK Tigrod 5356 is a magnesium alloyed aluminium wire for TIG welding of saltwater resistant Al-Mg-alloys containing up to 5% Mg. The welding wire is the most used type, and is intended for welding alloys equivalent to ENAW-5083 ( SS 4140), for example, where high-strength of the weld joint is desired. Base material in series 5XXX, which together with OK Tigrod 5356 provides a weld with more than 3% Mg with good resistance to cracks caused by tensile corrosion, even when operating temperatures exceed 65ºC. The alloy cannot be heat treated. Current type AC.
Code in accordance with: SFA/AWS A5.10 R5356. EN ISO 18273 S Al 5356 (AlMg5Cr(A)).
Approval: CWB AWS A5.10 - DB 61.039.02 - VdTÜV 04665 - Ü 61.039 - CE EN 13479.

Electrode esab ok femax 33.80

Electrode esab ok femax 33.80

Art. no.: 119384

OK Femax 33.80 is a quick welding, all-current, high-performance electrode especially suited for standing fillet welds coarser material. The electrode is very easy to ignite and re-ignite, and provides a symmetrical and smooth weld profile with easy slag removal. The applicable steel types are general structural steel, pressure vessel steel and shipbuilding steel in ordinary strength grades. OK Femax 33.80 is also produced in 700 mm lengths, intended for welding in Fematic stands or other mechanical electrode holders. Welding in Fematic stands must be performed using alternating current, as direct current can cause blowing action.
Current type
AC, DC(+ -) OCV 50 V
.
Code in accordance with: SFA/AWS A5.1
E7024. EN ISO 2560-A
E 42 0 RR 73.

Approval: ABS 2 - BV 2 -

DB 10.039.28 - DNV 2

- GL 2Y

- LR 2, 2Y - PRS 2

- RS 2 - Sepros UNA 408919

- VdTÜV 00634 - CE EN 13479.

Electrode esab ok 43.32

Electrode esab ok 43.32

Art. no.: 119390

Rutile. OK 43.32 is a very easily welded, all-current electrode with which even novice welders achieve a good result. It is an excellent thin metal electrode and the good flowability makes even dumbbell and fillet welds have an even and beautiful strand appearance. The electrode ignites easily even with small transformers with 50 V idling voltage (OCV). OK 43.32 is recommended for ordinary carbon steel, and for A quality ship steel in ordinary strength grades. Current type AC, DC(+-) OCV 50 V.
Code in accordance with: SFA/AWS A5.1 E6013. EN ISO 2560-A E 42 0 RR 12.
Approval: ABS 2 - BV 1- DB 80.039.02 - DNV 2 - GL 1- LR 1 - VdTÜV 00621 - CE EN13479 - RS 2 .

Electrode esab ok 55.00

Electrode esab ok 55.00

Art. no.: 490799

OK 55.00 is the strongest non-alloyed, all-current electrode especially suited to high-strength, low-alloyed steel or steel castings. The electrode’s brittle fracture strength at low temperatures is extremely good as is the weld’s hot cracking strength. It provides a weld with very good mechanical properties, especially regarding impact resistance. Current type AC, DC+ OCV 65 V.
Code in accordance with: SS standard: SFA/AWS A5.1 E7018-1H4 R. CSA W48 E4918-1. EN ISO 2560-A E 46 5 B 32 H5.
Approval: ABS 3H5, 3Y H5- BV 3Y H5 - CWB CSA W48 - DB 10.039.03 - DNV 3YH10 - GL 3YH5 - LR 3, 3Y H5 - RS 3YHH - Sepros UNA 409819 - VdTÜV 00632 - CE EN 13479.

Electrode esab ok 61.30

Electrode esab ok 61.30

Art. no.: 119422

OK 61.30 is an extra low-carbon stainless all-current electrode made of alloy type 19 Cr 10 Ni. The electrode is intended for welding of austenitic stainless steel equivalent to 304, 304L, 308, 308L, X10CrNi18-8 (SS2331), X5CrNi18-10 (SS2332), SS2333, X2CrNi18-9 (SS2352) or equivalent steel in accordance with other norms. OK 61.30 can also be used for welding stabilising steel X6CrNiTi18-10 (SS2337) and X6CrNiNb18-10 (SS2338) if these will not operate in temperatures exceeding 350°C. OK 61.30 ignites and re-ignites very easily and is very short-circuit proof while welding. The electrode provides beautiful strands and the slag is self-loosening. Fragile dimensions up to 3.2 mm can be welded in all positions.
Current type: DC+, AC OCV 50 V.
Code in accordance with: EN 1600, E 19 9 L R 1 2. SFA/AWS A5.4, E308L-17, Werkstoff No. 1.4316. CSA W48, E 308L-17.
Approval: ABS Stainless - CWB CSA W48 - DB 30.039.02 - DNV 308L - Sepros UNA 409820 - VdTÜV 00792 - CE EN 13479.

Electrode esab ok 63.20

Electrode esab ok 63.20

Art. no.: 116504

OK 63.20 is an extra low-carbon content stainless electrode of type 18Cr 12Ni 2,8Mo primarily intended for position welding of thin-walled pipes. The electrode has a thin casing and can be welded according to the so-called “drop weld method" or vertically descending, which goes quicker. This requires an electrode with very good ignition and re-ignition properties, which makes OK 63.20 very suitable. The electrode is directly suited for the stainless steels types 316 and 316L, for example X3CrNiMo17-13-3 (SS2343), X2CrNiMo18-14-3 (SS2353) or equivalent steels according to other standards. The weld’s low carbon content creates good resistance to inter-crystalline corrosion, but also against spot corrosion and most types of corrosion in reducing and neutral solutions. OK 63.20 can also be used for welding stabilising steel if these will not operate in temperatures exceeding 400°C. Current type DC+, AC OCV 50 V.
Code in accordance with: EN 1600 E 19 12 3 L R 1 1. SFA/AWS A5.4 E316L-16. Werkstoff No. 1.4430. CSA W48 E316L-16.
Approval: CWB CSA W48 - Sepros UNA 409820 - VdTÜV 09716 - CE EN 13479.

Electrode esab ok 63.20 vac-pack

Electrode esab ok 63.20 vac-pack

Art. no.: 250337

OK 63.20 is an extra low-carbon content stainless electrode of type 18Cr 12Ni 2,8Mo primarily intended for position welding of thin-walled pipes. The electrode has a thin casing and can be welded according to the so-called “drop weld method" or vertically descending, which goes quicker. This requires an electrode with very good ignition and re-ignition properties, which makes OK 63.20 very suitable. The electrode is directly suited for the stainless steels types 316 and 316L, for example X3CrNiMo17-13-3 (SS2343), X2CrNiMo18-14-3 (SS2353) or equivalent steels according to other standards. The weld’s low carbon content creates good resistance to inter-crystalline corrosion, but also against spot corrosion and most types of corrosion in reducing and neutral solutions. OK 63.20 can also be used for welding stabilising steel if these will not operate in temperatures exceeding 400°C. Current type DC+, AC OCV 50 V.
Code in accordance with: EN 1600 E 19 12 3 L R 1 1. SFA/AWS A5.4 E316L-16. Werkstoff No. 1.4430. CSA W48 E316L-16.
Approval: CWB CSA W48 - Sepros UNA 409820 - VdTÜV 09716 - CE EN 13479.

Electrode esab ok 63.30 vac-pack

Electrode esab ok 63.30 vac-pack

Art. no.: 301910

OK 63.30 is an extra low-carbon content stainless electrode of type 18Cr 12Ni 2,8Mo. OK 63.30 is intended for welding stainless or so-called acid-resistant steels such as X3CrNiMo17-13-3 (SS2343), X2CrNiMo18-14-3 (SS2353) or equivalent steel in accordance with other standards. The electrode is even suited for titanium and niobium-stabilised stainless 18-12 steels of type SS2344 and SS2345 if very corrosive conditions are not present. The electrode ignites and re-ignites very easily and is very short-circuit proof while welding. It provides very beautiful strands and the slag is self-loosening. Fragile dimensions up to Ø 3.2 mm can be welded in all positions while the coarser dimensions should only be used in horizontal position. Current type DC+, AC OCV 50 V.
Code in accordance with: EN 1600 E 19 12 3 L R 1 2 SFA/AWS A5.4 E316L-17 Werkstoff No. 1.4430 CSA W48 E316L-17
Approval: ABS E316L-17 - CWB CSA W48 - DB 30.039.06 - DNV 316L - GL 4571 - LR 316L - Sepros UNA 409820 - VdTÜV 00262 - CE EN 13479.

Electrode esab ok 67.70

Electrode esab ok 67.70

Art. no.: 122792

OK 67.70 is an over-alloyed stainless steel electrode for welding stainless steel to other types of steel. For welding stainless steel to heat resistant steel, for example SS 2116, SS 2218 ( 10CrMo9-10). At high operational temperatures, OK 92.26 should be used. The electrode is suitable for bottom runs in the shift between compound plates unalloyed and stainless steel. OK 67.70 has excellent welding properties both on direct and alternating current. It can be used in all situations, except vertically downwards, and for all kinds of joins. Current type DC+, AC OCV 55 V.
Code in accordance with: EN 1600 E 23 12 2 L R 3 2. SFA/AWS A5.4 E309MoL-17. Werkstoff No. 1.4459. CSA W48 E309LMo-17.
Approval: CWB CSA W48 - DB 30.039.05 - DNV 309 Mo LR SS/CMn - RINA E 309Mo - Sepros UNA 409820 - VdTÜV 02424 - CL EN 1600 - BV UP- CE EN 13479-

Electrode esab ok 73.08 vac-pack

Electrode esab ok 73.08 vac-pack

Art. no.: 249302

OK 73.08 is a CuNi alloyed LMA all-current electrode that provides a weld with good corrosion resistance against saltwater and flue gases, and are used for weather-resistant steel and for structural steel in ships. The weld has excellent mechanical properties. OK 73.08 is specially suited for welding armour steel in icebreakers and other ships that work in conditions where protective paint is removed. Intended for e.g. CORTEN, Domex 350W, UHBCCP etc. The good mechanical strength properties also make it suitable for welding of general high-strength steel and for ordinary and high-strength ship steel of A, D and E qualities. Current type AC, DC(+) OCV 65 V.
Code in accordance with: SFA/AWS A5.5 E8018-G. EN ISO 2560-A E 46 5 Z B 32.
Approval: ABS 3H5, 3Y - BV 3Y HH - DB 10.039.20 - DNV 3 YH10 - GL 3YH15 - LR 3, 3Y H15 - RS 3YHH - VdTÜV 02115 - CE EN 13479.

Electrode ESAB OK 74.78 VacPac

Electrode ESAB OK 74.78 VacPac

Art. no.: 59825961

OK 74.78 is a basic LMA all-current electrode for high-strength steel welding in structures with impact resistance down to -40 ° C. The electrode is suitable for manual form welding during joint welding of rails, as well as welding where a hardness of about 250HV is desired. Current type AC, DC+ OCV 65 V.
Code in accordance with: /AWS A5.5 E9018-D1. EN 757 E 55 4 MnMo B 3 2 H5.
Approval: ABS 3H5, 3Y - BV 3Y HH - DB 10.039.17 - DB 20.039.02 - DNV 3 YH10 - LR 3, 3Y H15 - Sepros UNA 409819 - VdTÜV 01027 - CE EN 13479.

Electrode esab ok 84.58

Electrode esab ok 84.58

Art. no.: 288654

OK 84.58 is a hard weld electrode that provides a martensitic durable weld with medium corrosion resistance. The electrode’s composition is adapted so that full hardness 54-58 is HRC is maintained from the first strand on non-alloyed and low-alloyed steel, independent of the cooling rate. The application area is hard welding where both abrasive wear and impacts are included e.g. details for agricultural machines, loaders, road machines, mixers etc.
Current type
AC, DC+ OCV 65 V. Welded material hardness unprocessed
53-59 HRC.

Code in accordance with: DIN 8555
E6-UM-55-G. Approval: Sepros UNA 409819.

Electrode filarc 27p vac-pack

Electrode filarc 27p vac-pack

Art. no.: 258175

FILARC 27P is a basic electrode developed for descending welding of dumbbell joints in pipes. The electrode provides a weld with good mechanical properties and low hydrogen content. It also very good to use for fastening as it provides a thin and fine fastening.
Current type
DC+.
Code in accordance with: SFA/AWS A5.5
E8018-G.
EN ISO 2560-A
E 46 4 B 41 H5.

Electrode filarc 35 2.0x300mm

Electrode filarc 35 2.0x300mm

Art. no.: 74683635

FILARC 35 is a basic, allround electrode with very good welding properties. The electrode welds with a soft and stable arc, and is very suitable for using in pipe welding where it provides an even and fine root strand with good fit to the joint edges. It provides good slag removal, which reduces the risk of slag cavities. Current type DC+(-).
Code in accordance with SFA/AWS A5.1 E7018-1. EN ISO 2560-A E 42 4 B 42.
Approval: ABS 3H5, 3Y - BV 3YHH - DNV 4YH10 - GL 3YH10 - LR 3, 3Y H15 - RS 4Y40HH - VdTÜV 02556 - CE EN 13479.

Electrode filarc 35 2.0x300mm

Solder Wire Lead-Free EL-FLUSS

Solder Wire Lead-Free EL-FLUSS

Art. no.: 279430

Lead-free flux containing solder wire for special soldering in electronics. With non-halogen flux-EL, flux residues needn’t be washed off.

Showing 52 of 76