Order lines: 0

Ahlsell Products Heating and Sanitation Valves and measuring devices Ventiler InjusteringsventilerAdjustment valves manual

Adjustment valves manual

Behöver du ventiler?
Vi på Ahlsell hjälper dig att hitta rätt produkt för just din applikation.
Oavsett om du arbetar med industriapplikationer eller VS-installationer har vi rätt produkt för just detta.
Vi erbjuder ett brett sortiment av produkter här på webben, men om det skulle vara så att du inte hittar det du söker
har vi både kompetenta säljare samt ett globalt leverantörsnät för att hjälpa dig att hitta rätt produkt.

Balancing valve TA Modulator, IMI

Balancing valve TA Modulator, IMI

Art. no.: 4882949

Pressure independent adjustment and control valve for modulating control. The new unique EQM characteristics provide very accurate temperature control.
The valve is compatible with linear and proportional actuators and 3-point actuators. A built-in differential pressure regulator provides high authority, stability and automatic limitation of the prescribed flow. Measurement of flow and available pressure enable optimization and diagnostics of the system.

Balancing valve TA Modulator, IMI

Balancing valve TA Modulator, IMI

Balancing valve TA Modulator, IMI

Balancing valve TA Modulator, IMI

Control Valves STV, MMA

Control Valves STV, MMA

Art. no.: 4892565

The STV balancing valve is used to adjust and balance the flow in heating and cooling systems, e.g. in trunks, paths, feeder tubes, shunt valve sets and cooling baffles.

Control Valves STV, MMA

Control Valves STV, MMA

Control Valves STV, MMA

Throttle valves STK, TA

Throttle valves STK, TA

Art. no.: 4851416

Setting is done using a handle fitted on the valve spindle. When the handle is removed, the valve setting cannot be changed, but an arrow on the valve spindle shows the set value. The handle is not supplied with the valve but must be ordered separately. Handle for STK and radiator valves TA, see RSK no. 4756805.

Throttle valves STK, TA

Control Valves without Drainage STV, MMA

Control Valves without Drainage STV, MMA

Art. no.: 4892541

Threaded, no drain.

Control Valves without Drainage STV, MMA

Control Valves without Drainage STV, MMA

Control Valves without Drainage STV, MMA

Control Valves without Drainage STV, MMA

Control Valves without Drainage STV, MMA

Overflow valve BPV52198, TA

Overflow valve BPV52198, TA

Art. no.: 4829822

BPV 52198, straight, setting range 10-60 kPa.

Main valve LENO™ MSV-BD, Danfoss

Main valve LENO™ MSV-BD, Danfoss

Art. no.: 4893094

Combined adjustment and shut-off valve for heating and cooling plants.

Throttle valve Inline-Setter

Throttle valve Inline-Setter

Art. no.: 4876009

Restriction valve with built-in flow meter.

Balancing tool for TBV-C, -CM and -CMP, TA

Balancing tool for TBV-C, -CM and -CMP, TA

Art. no.: 4829830

Adjusting tool for TBV-C, TBV-CM and TBV-CMP.

Balancing valves TBV-C, TA

Balancing valves TBV-C, TA

Art. no.: 4829836

Terminal valve for ON/OFF control. For use on units in heating and cooling systems. TA’s dezincification-resistant alloy AMETAL®.

Balancing valves TBV-C, TA

Balancing valves TBV-C NF, TA

Balancing valves TBV-C NF, TA

Art. no.: 4829837

Terminal valve for ON/OFF control. For use on units in heating and cooling systems. TA’s dezincification-resistant alloy AMETAL®.

Balancing valves TBV-C NF, TA

Balancing valves TBV-C NF, TA

Balancing valves TBV-C NF, TA

Balancing valves TBV-CM LF, TA

Balancing valves TBV-CM LF, TA

Art. no.: 4829851

Terminal valve for modulating control. For use on units in heating and cooling systems. TA’s dezincification-resistant alloy AMETAL®.

Balancing valves TBV-CM LF, TA

Balancing valves TBV-CM NF, TA

Balancing valves TBV-CM NF, TA

Art. no.: 4829852

Terminal valve for modulating control. For use on units in heating and cooling systems. TA’s dezincification-resistant alloy AMETAL®. DN15-20 can be connected to smooth pipes with KOMBI compression ring coupling.

Balancing valves TBV-CM NF, TA

Press Coupling Set for STADA, STAD-C

Press Coupling Set for STADA, STAD-C

Art. no.: 4891659

For connection with press coupling.

Control Valves with Drainage STVM, MMA

Control Valves with Drainage STVM, MMA

Art. no.: 4892548

Type MMA Balance with draining. For adjusting, shutting-off and flow measuring in heating, cooling and tap water installations. Brass dezincification-resistant.

Control Valves with Drainage STVM, MMA

Control Valves with Drainage STVM, MMA

Control Valves with Drainage STVM, MMA

Control Valves with Drainage STVM, MMA

Control Valves with Drainage STVM, MMA

Soldering coupling for District Heating (STAD-C)

Soldering coupling for District Heating (STAD-C)

Art. no.: 4891613

For STADA, STAD-D, TBV-C.

Balancing valve Compact-P, TA IMI

Balancing valve Compact-P, TA IMI

Art. no.: 4829866

Adjustment and control valve pressure dependent, ext. adjustable maximum flow for exact moisture adjustment, thread M30x1.5 hinge for actuator.

Balancing valve Compact-P, TA IMI

Balancing valve Compact-P, TA IMI

Control Valve, Evobalance STV 10

Control Valve, Evobalance STV 10

Art. no.: 4882931

Control Valve, Evobalance STV 10

Control Valve, Evobalance STVM 10

Control Valve, Evobalance STVM 10

Art. no.: 4882939

Control Valve, Evobalance STVM 10

Control Valve STAD Nordic Heating/Cooling without Drainage

Control Valve STAD Nordic Heating/Cooling without Drainage

Art. no.: 4889971

Control Valve STAD Nordic Heating/Cooling without Drainage

Control Valve STAD Nordic Heating/Cooling with Drainage

Control Valve STAD Nordic Heating/Cooling with Drainage

Art. no.: 4889978

Control Valve STAD Nordic Heating/Cooling with Drainage

Control Valve STADA AVT Nordic, TA

Control Valve STADA AVT Nordic, TA

Art. no.: 4889998

Control Valve STADA AVT Nordic, TA

Control Valve, STAD AVT STS, TA

Control Valve, STAD AVT STS, TA

Art. no.: 4890022

Control Valve, STAD AVT STS, TA

Control Valve, STAD AVT STS, TA

Return valve, FJV-15, Danfoss

Return valve, FJV-15, Danfoss

Art. no.: 5402516

Connection coupling, IMI

Connection coupling, IMI

Art. no.: 4891668

Balancing valve STAD Zero. TA

Balancing valve STAD Zero. TA

Art. no.: 4890028

Adjustment valve Zero internal thread with drain, PN25, temp -20 ° C to + 120 ° C, lead-free brass (<0.1% lead).

Balancing valve STAD Zero. TA

Balancing valve PVM, MMA

Balancing valve PVM, MMA

Art. no.: 4882947

Balancing valve PVM in brass with internal thread. 20-80kPa.

Balancing valve PVM, MMA

Balancing valve PVM, MMA

Balancing valves STAF-SG, TA

Balancing valves STAF-SG, TA

Art. no.: 4890039

STAF-SG with flanges PN25. Made of nodular iron with relieved cone. DN20-DN50 also takes counter-flanges PN 16.

Balancing valves STAF-SG, TA

Balancing valves STAF-SG, TA

Balancing valves STAF-SG, TA

Art. no.: 4889987

STAF-SG with flanges PN25. Made of nodular iron with relieved cone. DN20-DN50 also takes counter-flanges PN 16.

Balancing valves STAF-SG, TA

Balancing valves STAF-SG, TA

Balancing valves STAF-SG, TA

Balancing valves STAF-SG, TA

Balancing valves STAF-SG, TA

Measuring Nipple for STA-DR, STAF, TA

Measuring Nipple for STA-DR, STAF, TA

Art. no.: 4891599

For STAF/STA-DR.

Showing 29 of 29